Hey guys. So now we're going to talk about a named reaction called dehydrohalogenation. I know the name sounds tricky, but actually, it turns out that you already know all the parts of this mechanism already. So it's actually pretty easy. Let's go ahead and check it out. As you can see, the name is pretty long, but all this really is is an E2 mechanism because if you think about the name, it's saying dehydro, we're taking away 1 hydrogen and we're taking away 1 halogen. Well, that's exactly what happens with a typical E2 mechanism. Remember that we always break those 2 sigma bonds and make a pi bond at the end. And that's exactly what we're going to do. So let's go ahead and check it out. Basically, you would have an alkyl halide and in this case, do we prefer that alkyl halide to be like primary or tertiary? What do you think is better? We just said this is an E2 reaction, so that means that we're going to prefer the more substituted alkyl halide that's going to favor elimination more. Okay? So that means that hopefully, we have like a secondary or tertiary alkyl halide and we're reacting that with some kind of base. Now notice here I'm just using the word base in general, but remember the type of base could lead to a different type of product. Okay? Because we had Zaitsev and we had Hoffman and the type of base that you use could prefer one product over another. Let's just go ahead and just draw the general E2 elimination product right now. I would take my base and where would those arrows go to? Do you remember? Remember that you'd always take off a Beta hydrogen. This is actually called Beta hydrogen elimination. So I'll take my minus, grab a Beta hydrogen. Now notice that the geometry of that beta hydrogen is in a special position and it's in the anticoplanar position. Remember that that's important because if you were to make a Newman projection out of this guy, you would want to make sure that your groups are facing opposite directions or in the anti position so that they can be in the most favorable orientation to eliminate. Okay? So I would take that, but remember that elimination always has 3 arrows. So I would take the electrons from here and make a double bond and finally I would kick out my X and what I'm going to get at the end is just a new double bond where basically these 2 methyl groups here are now located here and these 2 methyl groups here are now located there. Plus I would get, obviously, my base with the new hydrogen on it, so that would be the conjugate acid And I would also get the leaving group X-. Okay? So that was really easy. But now you guys just understand that that's the name associated with this type of reaction. Whenever we're using a strong base to eliminate an alkyl halide through an E2 mechanism, that's called dehydrohalogenation. And you have to think of all those things in terms of anticoplanar, in terms of Zaitsev and Hoffman, all of that is fair game. Okay? So now I have a practice problem for you guys. I want you guys to take your time trying to draw the products based on exactly what reagents you see and then I'll give you the answer. So anyway, go for it.
- 1. A Review of General Chemistry5h 5m
- Summary23m
- Intro to Organic Chemistry5m
- Atomic Structure16m
- Wave Function9m
- Molecular Orbitals17m
- Sigma and Pi Bonds9m
- Octet Rule12m
- Bonding Preferences12m
- Formal Charges6m
- Skeletal Structure14m
- Lewis Structure20m
- Condensed Structural Formula15m
- Degrees of Unsaturation15m
- Constitutional Isomers14m
- Resonance Structures46m
- Hybridization23m
- Molecular Geometry16m
- Electronegativity22m
- 2. Molecular Representations1h 14m
- 3. Acids and Bases2h 46m
- 4. Alkanes and Cycloalkanes4h 19m
- IUPAC Naming29m
- Alkyl Groups13m
- Naming Cycloalkanes10m
- Naming Bicyclic Compounds10m
- Naming Alkyl Halides7m
- Naming Alkenes3m
- Naming Alcohols8m
- Naming Amines15m
- Cis vs Trans21m
- Conformational Isomers13m
- Newman Projections14m
- Drawing Newman Projections16m
- Barrier To Rotation7m
- Ring Strain8m
- Axial vs Equatorial7m
- Cis vs Trans Conformations4m
- Equatorial Preference14m
- Chair Flip9m
- Calculating Energy Difference Between Chair Conformations17m
- A-Values17m
- Decalin7m
- 5. Chirality3h 39m
- Constitutional Isomers vs. Stereoisomers9m
- Chirality12m
- Test 1:Plane of Symmetry7m
- Test 2:Stereocenter Test17m
- R and S Configuration43m
- Enantiomers vs. Diastereomers13m
- Atropisomers9m
- Meso Compound12m
- Test 3:Disubstituted Cycloalkanes13m
- What is the Relationship Between Isomers?16m
- Fischer Projection10m
- R and S of Fischer Projections7m
- Optical Activity5m
- Enantiomeric Excess20m
- Calculations with Enantiomeric Percentages11m
- Non-Carbon Chiral Centers8m
- 6. Thermodynamics and Kinetics1h 22m
- 7. Substitution Reactions1h 48m
- 8. Elimination Reactions2h 30m
- 9. Alkenes and Alkynes2h 9m
- 10. Addition Reactions3h 18m
- Addition Reaction6m
- Markovnikov5m
- Hydrohalogenation6m
- Acid-Catalyzed Hydration17m
- Oxymercuration15m
- Hydroboration26m
- Hydrogenation6m
- Halogenation6m
- Halohydrin12m
- Carbene12m
- Epoxidation8m
- Epoxide Reactions9m
- Dihydroxylation8m
- Ozonolysis7m
- Ozonolysis Full Mechanism24m
- Oxidative Cleavage3m
- Alkyne Oxidative Cleavage6m
- Alkyne Hydrohalogenation3m
- Alkyne Halogenation2m
- Alkyne Hydration6m
- Alkyne Hydroboration2m
- 11. Radical Reactions1h 58m
- 12. Alcohols, Ethers, Epoxides and Thiols2h 42m
- Alcohol Nomenclature4m
- Naming Ethers6m
- Naming Epoxides18m
- Naming Thiols11m
- Alcohol Synthesis7m
- Leaving Group Conversions - Using HX11m
- Leaving Group Conversions - SOCl2 and PBr313m
- Leaving Group Conversions - Sulfonyl Chlorides7m
- Leaving Group Conversions Summary4m
- Williamson Ether Synthesis3m
- Making Ethers - Alkoxymercuration4m
- Making Ethers - Alcohol Condensation4m
- Making Ethers - Acid-Catalyzed Alkoxylation4m
- Making Ethers - Cumulative Practice10m
- Ether Cleavage8m
- Alcohol Protecting Groups3m
- t-Butyl Ether Protecting Groups5m
- Silyl Ether Protecting Groups10m
- Sharpless Epoxidation9m
- Thiol Reactions6m
- Sulfide Oxidation4m
- 13. Alcohols and Carbonyl Compounds2h 17m
- 14. Synthetic Techniques1h 26m
- 15. Analytical Techniques:IR, NMR, Mass Spect6h 50m
- Purpose of Analytical Techniques5m
- Infrared Spectroscopy16m
- Infrared Spectroscopy Table31m
- IR Spect:Drawing Spectra40m
- IR Spect:Extra Practice26m
- NMR Spectroscopy10m
- 1H NMR:Number of Signals26m
- 1H NMR:Q-Test26m
- 1H NMR:E/Z Diastereoisomerism8m
- H NMR Table21m
- 1H NMR:Spin-Splitting (N + 1) Rule17m
- 1H NMR:Spin-Splitting Simple Tree Diagrams11m
- 1H NMR:Spin-Splitting Complex Tree Diagrams8m
- 1H NMR:Spin-Splitting Patterns8m
- NMR Integration18m
- NMR Practice14m
- Carbon NMR4m
- Structure Determination without Mass Spect47m
- Mass Spectrometry12m
- Mass Spect:Fragmentation28m
- Mass Spect:Isotopes27m
- 16. Conjugated Systems6h 13m
- Conjugation Chemistry13m
- Stability of Conjugated Intermediates4m
- Allylic Halogenation12m
- Reactions at the Allylic Position39m
- Conjugated Hydrohalogenation (1,2 vs 1,4 addition)26m
- Diels-Alder Reaction9m
- Diels-Alder Forming Bridged Products11m
- Diels-Alder Retrosynthesis8m
- Molecular Orbital Theory9m
- Drawing Atomic Orbitals6m
- Drawing Molecular Orbitals17m
- HOMO LUMO4m
- Orbital Diagram:3-atoms- Allylic Ions13m
- Orbital Diagram:4-atoms- 1,3-butadiene11m
- Orbital Diagram:5-atoms- Allylic Ions10m
- Orbital Diagram:6-atoms- 1,3,5-hexatriene13m
- Orbital Diagram:Excited States4m
- Pericyclic Reaction10m
- Thermal Cycloaddition Reactions26m
- Photochemical Cycloaddition Reactions26m
- Thermal Electrocyclic Reactions14m
- Photochemical Electrocyclic Reactions10m
- Cumulative Electrocyclic Problems25m
- Sigmatropic Rearrangement17m
- Cope Rearrangement9m
- Claisen Rearrangement15m
- 17. Ultraviolet Spectroscopy51m
- 18. Aromaticity2h 31m
- 19. Reactions of Aromatics: EAS and Beyond5h 1m
- Electrophilic Aromatic Substitution9m
- Benzene Reactions11m
- EAS:Halogenation Mechanism6m
- EAS:Nitration Mechanism9m
- EAS:Friedel-Crafts Alkylation Mechanism6m
- EAS:Friedel-Crafts Acylation Mechanism5m
- EAS:Any Carbocation Mechanism7m
- Electron Withdrawing Groups22m
- EAS:Ortho vs. Para Positions4m
- Acylation of Aniline9m
- Limitations of Friedel-Crafts Alkyation19m
- Advantages of Friedel-Crafts Acylation6m
- Blocking Groups - Sulfonic Acid12m
- EAS:Synergistic and Competitive Groups13m
- Side-Chain Halogenation6m
- Side-Chain Oxidation4m
- Reactions at Benzylic Positions31m
- Birch Reduction10m
- EAS:Sequence Groups4m
- EAS:Retrosynthesis29m
- Diazo Replacement Reactions6m
- Diazo Sequence Groups5m
- Diazo Retrosynthesis13m
- Nucleophilic Aromatic Substitution28m
- Benzyne16m
- 20. Phenols55m
- 21. Aldehydes and Ketones: Nucleophilic Addition4h 56m
- Naming Aldehydes8m
- Naming Ketones7m
- Oxidizing and Reducing Agents9m
- Oxidation of Alcohols28m
- Ozonolysis7m
- DIBAL5m
- Alkyne Hydration9m
- Nucleophilic Addition8m
- Cyanohydrin11m
- Organometallics on Ketones19m
- Overview of Nucleophilic Addition of Solvents13m
- Hydrates6m
- Hemiacetal9m
- Acetal12m
- Acetal Protecting Group16m
- Thioacetal6m
- Imine vs Enamine15m
- Addition of Amine Derivatives5m
- Wolff Kishner Reduction7m
- Baeyer-Villiger Oxidation39m
- Acid Chloride to Ketone7m
- Nitrile to Ketone9m
- Wittig Reaction18m
- Ketone and Aldehyde Synthesis Reactions14m
- 22. Carboxylic Acid Derivatives: NAS2h 51m
- Carboxylic Acid Derivatives7m
- Naming Carboxylic Acids9m
- Diacid Nomenclature6m
- Naming Esters5m
- Naming Nitriles3m
- Acid Chloride Nomenclature5m
- Naming Anhydrides7m
- Naming Amides5m
- Nucleophilic Acyl Substitution18m
- Carboxylic Acid to Acid Chloride6m
- Fischer Esterification5m
- Acid-Catalyzed Ester Hydrolysis4m
- Saponification3m
- Transesterification5m
- Lactones, Lactams and Cyclization Reactions10m
- Carboxylation5m
- Decarboxylation Mechanism14m
- Review of Nitriles46m
- 23. The Chemistry of Thioesters, Phophate Ester and Phosphate Anhydrides1h 10m
- 24. Enolate Chemistry: Reactions at the Alpha-Carbon1h 53m
- Tautomerization9m
- Tautomers of Dicarbonyl Compounds6m
- Enolate4m
- Acid-Catalyzed Alpha-Halogentation4m
- Base-Catalyzed Alpha-Halogentation3m
- Haloform Reaction8m
- Hell-Volhard-Zelinski Reaction3m
- Overview of Alpha-Alkylations and Acylations5m
- Enolate Alkylation and Acylation12m
- Enamine Alkylation and Acylation16m
- Beta-Dicarbonyl Synthesis Pathway7m
- Acetoacetic Ester Synthesis13m
- Malonic Ester Synthesis15m
- 25. Condensation Chemistry2h 9m
- 26. Amines1h 43m
- 27. Heterocycles2h 0m
- Nomenclature of Heterocycles15m
- Acid-Base Properties of Nitrogen Heterocycles10m
- Reactions of Pyrrole, Furan, and Thiophene13m
- Directing Effects in Substituted Pyrroles, Furans, and Thiophenes16m
- Addition Reactions of Furan8m
- EAS Reactions of Pyridine17m
- SNAr Reactions of Pyridine18m
- Side-Chain Reactions of Substituted Pyridines20m
- 28. Carbohydrates5h 53m
- Monosaccharide20m
- Monosaccharides - D and L Isomerism9m
- Monosaccharides - Drawing Fischer Projections18m
- Monosaccharides - Common Structures6m
- Monosaccharides - Forming Cyclic Hemiacetals12m
- Monosaccharides - Cyclization18m
- Monosaccharides - Haworth Projections13m
- Mutarotation11m
- Epimerization9m
- Monosaccharides - Aldose-Ketose Rearrangement8m
- Monosaccharides - Alkylation10m
- Monosaccharides - Acylation7m
- Glycoside6m
- Monosaccharides - N-Glycosides18m
- Monosaccharides - Reduction (Alditols)12m
- Monosaccharides - Weak Oxidation (Aldonic Acid)7m
- Reducing Sugars23m
- Monosaccharides - Strong Oxidation (Aldaric Acid)11m
- Monosaccharides - Oxidative Cleavage27m
- Monosaccharides - Osazones10m
- Monosaccharides - Kiliani-Fischer23m
- Monosaccharides - Wohl Degradation12m
- Monosaccharides - Ruff Degradation12m
- Disaccharide30m
- Polysaccharide11m
- 29. Amino Acids3h 20m
- Proteins and Amino Acids19m
- L and D Amino Acids14m
- Polar Amino Acids14m
- Amino Acid Chart18m
- Acid-Base Properties of Amino Acids33m
- Isoelectric Point14m
- Amino Acid Synthesis: HVZ Method12m
- Synthesis of Amino Acids: Acetamidomalonic Ester Synthesis16m
- Synthesis of Amino Acids: N-Phthalimidomalonic Ester Synthesis13m
- Synthesis of Amino Acids: Strecker Synthesis13m
- Reactions of Amino Acids: Esterification7m
- Reactions of Amino Acids: Acylation3m
- Reactions of Amino Acids: Hydrogenolysis6m
- Reactions of Amino Acids: Ninhydrin Test11m
- 30. Peptides and Proteins2h 42m
- Peptides12m
- Primary Protein Structure4m
- Secondary Protein Structure17m
- Tertiary Protein Structure11m
- Disulfide Bonds17m
- Quaternary Protein Structure10m
- Summary of Protein Structure7m
- Intro to Peptide Sequencing2m
- Peptide Sequencing: Partial Hydrolysis25m
- Peptide Sequencing: Partial Hydrolysis with Cyanogen Bromide7m
- Peptide Sequencing: Edman Degradation28m
- Merrifield Solid-Phase Peptide Synthesis18m
- 32. Lipids 2h 50m
- 34. Nucleic Acids1h 32m
- 35. Transition Metals5h 33m
- Electron Configuration of Elements45m
- Coordination Complexes20m
- Ligands24m
- Electron Counting10m
- The 18 and 16 Electron Rule13m
- Cross-Coupling General Reactions40m
- Heck Reaction40m
- Stille Reaction13m
- Suzuki Reaction25m
- Sonogashira Coupling Reaction17m
- Fukuyama Coupling Reaction15m
- Kumada Coupling Reaction13m
- Negishi Coupling Reaction16m
- Buchwald-Hartwig Amination Reaction19m
- Eglinton Reaction17m
Dehydrohalogenation - Online Tutor, Practice Problems & Exam Prep
Dehydrohalogenation is an E2 elimination mechanism where a hydrogen and a halogen are removed from an alkyl halide, typically favoring more substituted alkyl halides (secondary or tertiary). The process involves beta hydrogen elimination in an anti-coplanar orientation, leading to the formation of a double bond. The choice of base influences the product, adhering to Zaitsev's and Hofmann's rules. Understanding the geometry and the role of the leaving group is crucial for predicting the outcome of the reaction.
The elimination reaction is exactly what it sounds like. Use a base to take away (de-) one hydrogen and one halogen. Voila! We’ve got a double bond.
The dehydrohalogenation mechanism.
Video transcript
Even more simply put, this is simply the name given to an E2 mechanism with a base an alkyl halide.
Supply the mechanism and major/minor products for the following dehydrohalogenation reaction:
Dehydrohalogenation mechanism and products
Video transcript
So right when we look at this problem, we notice that we have a nucleophile, which would be in this case, terbutoxide. And we have a leaving group, which in this case is an alkyl fluoride. So what that means is that this is a perfect situation to use the flow chart. Okay? The flow chart that I use for substitution and elimination reactions because right away, we don't know exactly what this is. We're going to need to identify it first. So let's go through the flowchart. The first question is my nucleophile negatively charged or neutral? And in this case, because I have a potassium, that's going to leave as a spectator ion, so it is negatively charged. So that means I'm going to go down the left side of my flowchart and I'm going to go to 2. 2, do I have a bulky base? Yes, I do. In this case, this is terbutoxide and terbutoxide is one of my bulky bases. So what that means is that I'm going to say yes here and that's going to indicate that I have a certain type of E2. I have an E2 and it's going to be Hoffman. Why is that? Well, my flowchart tells you that, so in case you just wanted to use the flowchart, you could. But on top of that, you know that it's Hoffman because of the fact that we have a bulky base and bulky bases prefer that kinetic product or the one that's easiest to form. Okay. The one that's fastest to form. So what that means is that if I have more than one option possible, I'm going to go with the less substituted option. Alright? So now we have to go ahead and identify beta carbons and we have to see how many different ones there are. So this is a beta carbon here, I'm going to call that beta and this is a beta carbon here.
So now my next question is do both of these beta carbons have at least 1 beta hydrogen on them? Yes, they do. Both of them do. So then my last question is, do they have hydrogens in the anticoplanar position? And now it turns out that I don't need to ask that question in this case. Do you remember why? Because I have not been given stereochemistry of the alkyl fluoride. So it says no chirality given. K? And since there's no chirality given, I don't really have to worry about if the hydrogen is in the anti position or not because I don't even know what position the fluoride is in. Alright? So it turns out that that last question I can ignore. I can say that I'm going to get both of these products. Now it's saying that I provide the major and minor products and the mechanism for this reaction, so I'm going to go ahead and draw the mechanism for what I think is going to be the major product and then I'll draw the other one as well.
The major product is going to go along in the less substituted direction, so it's probably going to be this H right here. Okay? So let's go ahead and draw our arrows. It's going to go basically terbutoxide looks like this. Okay? And I'm going to do the following. I'm going to grab the beta hydrogen, make a double bond, kick out the fluoride and what I'm going to get for that blue product is this. Okay? Cool. But now we also have another product that's possible. If it would have attacked the red position, then I would have gotten a double bond that looked like this. Okay? Now I just have to figure out which is going to be major, which one is going to be minor. So I look at how substituted each double bond is. This one is disubstituted. This one is trisubstituted. How did I know that? Actually, wow, okay, I messed up. This one is not disubstituted. This double bond only has one chain coming off of it, so it's actually only monosubstituted. Sorry about that. And then the red one is trisubstituted because it's got 3 different branches coming off of it. So one is way less substituted than the other. This is going to be my Hoffmann product and this is going to be my Zaitsev product. And when I'm using this base, which one do I prefer? I actually prefer the Hoffmann, so this is going to be my major. Okay? And then obviously that means that this is my minor. Does that make sense, guys? So really we haven't changed anything from the E2 mechanism, it's just that now we have a name for it. When you do an E2 with just an alkyl halide and a base, called dehydrohalogenation. Alright? Cool. So I hope that made sense. Let's go ahead and move on to the next topic.
Do you want more practice?
More setsHere’s what students ask on this topic:
What is dehydrohalogenation in organic chemistry?
Dehydrohalogenation is an E2 elimination mechanism in organic chemistry where a hydrogen atom and a halogen atom are removed from an alkyl halide. This process typically favors more substituted alkyl halides, such as secondary or tertiary ones. The reaction involves the elimination of a beta hydrogen in an anti-coplanar orientation, leading to the formation of a double bond. The choice of base can influence the product, following Zaitsev's or Hofmann's rules. Understanding the geometry and the role of the leaving group is crucial for predicting the reaction outcome.
How does the choice of base affect the product in dehydrohalogenation?
The choice of base in dehydrohalogenation significantly affects the product. A strong, bulky base tends to favor the formation of the less substituted alkene, following Hofmann's rule. In contrast, a smaller, more nucleophilic base usually leads to the more substituted alkene, adhering to Zaitsev's rule. This is because the steric hindrance of the bulky base makes it difficult to abstract the more hindered beta hydrogen, leading to the formation of the less substituted product.
What is the role of anti-coplanar orientation in dehydrohalogenation?
In dehydrohalogenation, the anti-coplanar orientation is crucial for the elimination process. This orientation ensures that the beta hydrogen and the leaving group (halogen) are positioned opposite each other in the same plane. This geometric arrangement allows for the most favorable overlap of orbitals, facilitating the formation of the double bond. Without this anti-coplanar arrangement, the reaction would be less efficient or might not occur at all.
What is the difference between Zaitsev's and Hofmann's rules in dehydrohalogenation?
Zaitsev's and Hofmann's rules predict the major product in dehydrohalogenation reactions. Zaitsev's rule states that the more substituted alkene will be the major product when a smaller, more nucleophilic base is used. This is because the more substituted alkene is generally more stable. Hofmann's rule, on the other hand, predicts that the less substituted alkene will be the major product when a bulky base is used. The steric hindrance of the bulky base makes it difficult to abstract the more hindered beta hydrogen, leading to the formation of the less substituted product.
Why are secondary and tertiary alkyl halides preferred in dehydrohalogenation?
Secondary and tertiary alkyl halides are preferred in dehydrohalogenation because they are more likely to undergo elimination rather than substitution. These more substituted alkyl halides stabilize the transition state better during the E2 elimination process. Additionally, the resulting alkenes from secondary and tertiary alkyl halides are generally more stable due to hyperconjugation and alkyl group electron-donating effects, making the elimination process more favorable.
Your Organic Chemistry tutors
- Predict the dehydrohalogenation product(s) that result when the following alkyl halides are heated in alcoholi...
- Predict the dehydrohalogenation product(s) that result when the following alkyl halides are heated in alcoholi...
- Predict the dehydrohalogenation product(s) that result when the following alkyl halides are heated in alcoholi...
- Predict the products formed by sodium hydroxide-promoted dehydrohalogenation of the following compounds. In ea...
- Predict the products formed by sodium hydroxide-promoted dehydrohalogenation of the following compounds.In eac...
- Predict the products formed by sodium hydroxide-promoted dehydrohalogenation of the following compounds.In eac...
- What halides would undergo E2 dehydrohalogenation to give the following pure alkenes?d. methylenecyclohexane
- What halides would undergo E2 dehydrohalogenation to give the following pure alkenes?e. 4-methylcyclohexene