Hey guys, in this brand new video, we're going to take a look at the equilibrium constant. Now, we're going to say that the variable we use to illustrate our equilibrium constant is the variable k. We're going to say k is a number equal to the ratio of products to reactants at a given temperature. Why do I say at a given temperature? Because we're going to say that temperature directly affects our equilibrium constant k. Increasing the temperature will increase our k value. Decreasing the temperature will decrease our k value. Now, we're going to say it's a ratio of products to reactants, so we're going to say here that \( k = \frac{\text{products}}{\text{reactants}} \). Now, we're going to say that k is important because its magnitude tells us how far to the left or to the right our chemical reaction is at a given temperature. So we're going to say if \( k > 1 \), then products are favored over reactants. Think about it. This makes sense because we said \( k = \frac{\text{products}}{\text{reactants}} \). So let's say our products are 10 and our reactants are 1. \( k = 10 \), definitely greater than 1. We're going to say when products are favored over our reactants, that means we're making more products. How do we make more products? By going in the forward direction. So the forward direction would be favored. Now in the opposite way, if \( k < 1 \), so let's say we have in this case, products are 1 but our reactants are 10. We'd have a \( k < 1 \). So in this case, if \( k < 1 \), then reactants are favored over products, which means our reaction is heading in the reverse direction. So the reverse direction would be favored. Just remember these two differences, when \( k > 1 \) and when \( k < 1 \). Now, what if we say \( k = 1 \)? We know that this is products over reactants, so that means that our products and reactants would have to be equal. Let's say they're both 10. \( \frac{10}{10} = 1 \). So when \( k = 1 \), we're going to say both our reactant and our product amounts are equal to one another. Now we're going to say the equilibrium constant \( k \) takes into account all the states of matter except 2. It doesn't look at solids and it doesn't look at liquids. It ignores those 2 states of matter.
- 1. Matter and Measurements4h 29m
- What is Chemistry?5m
- The Scientific Method9m
- Classification of Matter16m
- States of Matter8m
- Physical & Chemical Changes19m
- Chemical Properties8m
- Physical Properties5m
- Intensive vs. Extensive Properties13m
- Temperature (Simplified)9m
- Scientific Notation13m
- SI Units (Simplified)5m
- Metric Prefixes24m
- Significant Figures (Simplified)11m
- Significant Figures: Precision in Measurements7m
- Significant Figures: In Calculations19m
- Conversion Factors (Simplified)15m
- Dimensional Analysis22m
- Density12m
- Specific Gravity9m
- Density of Geometric Objects19m
- Density of Non-Geometric Objects9m
- 2. Atoms and the Periodic Table5h 23m
- The Atom (Simplified)9m
- Subatomic Particles (Simplified)12m
- Isotopes17m
- Ions (Simplified)22m
- Atomic Mass (Simplified)17m
- Atomic Mass (Conceptual)12m
- Periodic Table: Element Symbols6m
- Periodic Table: Classifications11m
- Periodic Table: Group Names8m
- Periodic Table: Representative Elements & Transition Metals7m
- Periodic Table: Elemental Forms (Simplified)6m
- Periodic Table: Phases (Simplified)8m
- Law of Definite Proportions9m
- Atomic Theory9m
- Rutherford Gold Foil Experiment9m
- Wavelength and Frequency (Simplified)5m
- Electromagnetic Spectrum (Simplified)11m
- Bohr Model (Simplified)9m
- Emission Spectrum (Simplified)3m
- Electronic Structure4m
- Electronic Structure: Shells5m
- Electronic Structure: Subshells4m
- Electronic Structure: Orbitals11m
- Electronic Structure: Electron Spin3m
- Electronic Structure: Number of Electrons4m
- The Electron Configuration (Simplified)22m
- Electron Arrangements5m
- The Electron Configuration: Condensed4m
- The Electron Configuration: Exceptions (Simplified)12m
- Ions and the Octet Rule9m
- Ions and the Octet Rule (Simplified)8m
- Valence Electrons of Elements (Simplified)5m
- Lewis Dot Symbols (Simplified)7m
- Periodic Trend: Metallic Character4m
- Periodic Trend: Atomic Radius (Simplified)7m
- 3. Ionic Compounds2h 18m
- Periodic Table: Main Group Element Charges12m
- Periodic Table: Transition Metal Charges6m
- Periodic Trend: Ionic Radius (Simplified)5m
- Periodic Trend: Ranking Ionic Radii8m
- Periodic Trend: Ionization Energy (Simplified)9m
- Periodic Trend: Electron Affinity (Simplified)8m
- Ionic Bonding6m
- Naming Monoatomic Cations6m
- Naming Monoatomic Anions5m
- Polyatomic Ions25m
- Naming Ionic Compounds11m
- Writing Formula Units of Ionic Compounds7m
- Naming Ionic Hydrates6m
- Naming Acids18m
- 4. Molecular Compounds2h 18m
- Covalent Bonds6m
- Naming Binary Molecular Compounds6m
- Molecular Models4m
- Bonding Preferences6m
- Lewis Dot Structures: Neutral Compounds (Simplified)8m
- Multiple Bonds4m
- Multiple Bonds (Simplified)6m
- Lewis Dot Structures: Multiple Bonds10m
- Lewis Dot Structures: Ions (Simplified)8m
- Lewis Dot Structures: Exceptions (Simplified)12m
- Resonance Structures (Simplified)5m
- Valence Shell Electron Pair Repulsion Theory (Simplified)4m
- Electron Geometry (Simplified)8m
- Molecular Geometry (Simplified)11m
- Bond Angles (Simplified)11m
- Dipole Moment (Simplified)15m
- Molecular Polarity (Simplified)7m
- 5. Classification & Balancing of Chemical Reactions3h 17m
- Chemical Reaction: Chemical Change5m
- Law of Conservation of Mass5m
- Balancing Chemical Equations (Simplified)13m
- Solubility Rules16m
- Molecular Equations18m
- Types of Chemical Reactions12m
- Complete Ionic Equations18m
- Calculate Oxidation Numbers15m
- Redox Reactions17m
- Spontaneous Redox Reactions8m
- Balancing Redox Reactions: Acidic Solutions17m
- Balancing Redox Reactions: Basic Solutions17m
- Balancing Redox Reactions (Simplified)13m
- Galvanic Cell (Simplified)16m
- 6. Chemical Reactions & Quantities2h 35m
- 7. Energy, Rate and Equilibrium3h 46m
- Nature of Energy6m
- First Law of Thermodynamics7m
- Endothermic & Exothermic Reactions7m
- Bond Energy14m
- Thermochemical Equations12m
- Heat Capacity19m
- Thermal Equilibrium (Simplified)8m
- Hess's Law23m
- Rate of Reaction11m
- Energy Diagrams12m
- Chemical Equilibrium7m
- The Equilibrium Constant14m
- Le Chatelier's Principle23m
- Solubility Product Constant (Ksp)17m
- Spontaneous Reaction10m
- Entropy (Simplified)9m
- Gibbs Free Energy (Simplified)18m
- 8. Gases, Liquids and Solids3h 25m
- Pressure Units6m
- Kinetic Molecular Theory14m
- The Ideal Gas Law18m
- The Ideal Gas Law Derivations13m
- The Ideal Gas Law Applications6m
- Chemistry Gas Laws16m
- Chemistry Gas Laws: Combined Gas Law12m
- Standard Temperature and Pressure14m
- Dalton's Law: Partial Pressure (Simplified)13m
- Gas Stoichiometry18m
- Intermolecular Forces (Simplified)19m
- Intermolecular Forces and Physical Properties11m
- Atomic, Ionic and Molecular Solids10m
- Heating and Cooling Curves30m
- 9. Solutions4h 10m
- Solutions6m
- Solubility and Intermolecular Forces18m
- Solutions: Mass Percent6m
- Percent Concentrations10m
- Molarity18m
- Osmolarity15m
- Parts per Million (ppm)13m
- Solubility: Temperature Effect8m
- Intro to Henry's Law4m
- Henry's Law Calculations12m
- Dilutions12m
- Solution Stoichiometry14m
- Electrolytes (Simplified)13m
- Equivalents11m
- Molality15m
- The Colligative Properties15m
- Boiling Point Elevation16m
- Freezing Point Depression9m
- Osmosis16m
- Osmotic Pressure9m
- 10. Acids and Bases3h 29m
- Acid-Base Introduction11m
- Arrhenius Acid and Base6m
- Bronsted Lowry Acid and Base18m
- Acid and Base Strength17m
- Ka and Kb12m
- The pH Scale19m
- Auto-Ionization9m
- pH of Strong Acids and Bases9m
- Acid-Base Equivalents14m
- Acid-Base Reactions7m
- Gas Evolution Equations (Simplified)6m
- Ionic Salts (Simplified)23m
- Buffers25m
- Henderson-Hasselbalch Equation16m
- Strong Acid Strong Base Titrations (Simplified)10m
- 11. Nuclear Chemistry56m
- BONUS: Lab Techniques and Procedures1h 38m
- BONUS: Mathematical Operations and Functions47m
- 12. Introduction to Organic Chemistry1h 34m
- 13. Alkenes, Alkynes, and Aromatic Compounds2h 12m
- 14. Compounds with Oxygen or Sulfur1h 6m
- 15. Aldehydes and Ketones1h 1m
- 16. Carboxylic Acids and Their Derivatives1h 11m
- 17. Amines38m
- 18. Amino Acids and Proteins1h 51m
- 19. Enzymes1h 37m
- 20. Carbohydrates1h 46m
- Intro to Carbohydrates4m
- Classification of Carbohydrates4m
- Fischer Projections4m
- Enantiomers vs Diastereomers8m
- D vs L Enantiomers8m
- Cyclic Hemiacetals8m
- Intro to Haworth Projections4m
- Cyclic Structures of Monosaccharides11m
- Mutarotation4m
- Reduction of Monosaccharides10m
- Oxidation of Monosaccharides7m
- Glycosidic Linkage14m
- Disaccharides7m
- Polysaccharides7m
- 21. The Generation of Biochemical Energy2h 8m
- 22. Carbohydrate Metabolism2h 22m
- 23. Lipids2h 26m
- Intro to Lipids6m
- Fatty Acids25m
- Physical Properties of Fatty Acids6m
- Waxes4m
- Triacylglycerols12m
- Triacylglycerol Reactions: Hydrogenation8m
- Triacylglycerol Reactions: Hydrolysis13m
- Triacylglycerol Reactions: Oxidation7m
- Glycerophospholipids15m
- Sphingomyelins13m
- Steroids15m
- Cell Membranes7m
- Membrane Transport10m
- 24. Lipid Metabolism1h 45m
- 25. Protein and Amino Acid Metabolism1h 37m
- 26. Nucleic Acids and Protein Synthesis2h 54m
- Intro to Nucleic Acids4m
- Nitrogenous Bases16m
- Nucleoside and Nucleotide Formation9m
- Naming Nucleosides and Nucleotides13m
- Phosphodiester Bond Formation7m
- Primary Structure of Nucleic Acids11m
- Base Pairing10m
- DNA Double Helix6m
- Intro to DNA Replication20m
- Steps of DNA Replication11m
- Types of RNA10m
- Overview of Protein Synthesis4m
- Transcription: mRNA Synthesis9m
- Processing of pre-mRNA5m
- The Genetic Code6m
- Introduction to Translation7m
- Translation: Protein Synthesis18m
The Equilibrium Constant - Online Tutor, Practice Problems & Exam Prep
The equilibrium constant, denoted as , represents the ratio of products to reactants at a specific temperature. A higher (greater than 1) indicates that products are favored, while a lower (less than 1) suggests reactants are favored. When equals 1, products and reactants are in equal amounts. Note that solids and liquids are not included in this ratio.
Equilibrium Constant K is associated with any reaction at equilibrium. Its numerical value determines if reactants or products are more greatly favored within a reaction.
The Equilibrium Constant K
The Equilibrium Constant Concept 1
Video transcript
The Equilibrium Constant K is a ratio of products to reactants. It only deals with gaseous or aqueous compounds.
The Equilibrium Constant Example 1
Video transcript
So it looks at, it only cares about really gases and also aqueous. Aqueous just means that the solvent is water, so a compound is dissolved in water. It would be aqueous. Now, knowing this, let's take a look at the following example. It says, Write the equilibrium expression for the following reaction. Here we have N2O5 (aqueous) gives us 4NO2 (aqueous) plus O2 (aqueous). It's important to look at the phases because remember if it's a solid or a liquid, we ignore it. Now we're going to say here k= products over reactants. So we're going to have our products as NO2 and remember, you have to use the coefficients in these calculations. The number in front of NO2 is a 4, so that 4 will become the power. So it's going to be NO2 to the 4 times O2. O2 just has a coefficient of 1 in front of it, which we don't have to show. Divided by N2O5. Again, the coefficient in front of N2O5 is a 2, so that becomes the power. So we would say that this represents our equilibrium expression or our equilibrium equation. Same thing. Equilibrium expression, equilibrium equation. Now that we've seen this one, let's look at B.
For B, we're going to say here, we're going to ignore this compound because it's a solid and we're going to ignore this compound because it's a solid. Here we're going to say k= products over reactants like before. But here's the thing, we're going to say we don't have any products available. But you have to put something on top. We're going to say it's equal to 1. Solids and liquids are ignored and in place of them, we're going to put 1. We're going to say this because things such as pressure don't really affect solids and liquids like they do gases and aqueous compounds. That's why they're equal to 1 because their number is being held constant. So we're going to replace solids and liquids with the number 1. And on the bottom we'd have O2. Now, a different way your professor could give you this is, we know there's a one here, so this could also be O2-1. So be aware of both types of answers. Both are correct. Both are saying the same thing. Inverse 1 just means 1 over whatever it is.
For the next one, again we ignore solids. The only thing that we don't ignore is this gas. Here, k= products over reactants, so just equal Xe3 because of the 3 over 1. But we don't need to put the one because anything over 1 is the same exact thing. So that would be our equilibrium C. We ignore the solids and the liquids.
Now that you've seen this, I want you guys to attempt to answer a question that follows this one, the practice one. Here, I want you to tell me who's greater in amount? Is it products or is it reactants? From that, you have to remember what do we say about K. When it's greater than 1, who's favored? When it's less than 1, who's favored? When it's equal to 1 who's favored. Remembering that will be a great way for you to approach this problem. Good luck, guys.
State which is greater in amount: reactants or products, based on the given equilibrium constant, K.
a) N2 (g) + O2 (g) ⇌ 2 NO (g) K = 1.0 x 1020
b) 2 CO (g) + O2 (g) ⇌ 2 CO2 (g) K = 2.2 x 10-22
c) 2 BrCl (g) ⇌ Br2 (g) + Cl2 (g) K = 1
a) products, b) products, c) reactants
a) reactants, b) products, c) reactants
a) products, b) reactants, c) equal
a) reactants, b) products, c) equal
The decomposition of nitrogen monoxide can be achieved under high temperatures to create the products of nitrogen and oxygen gas.
6 NO(aq) ⇌ 3 N2(aq) + 3 O2(aq)
a) What is the equilibrium equation for the reaction above?
b) What is the equilibrium expression for the reverse reaction.
The equilibrium constant, K, for 2 NO (g) + O2 (g) ⇌ 2 NO2 (g) is 6.9 x 102.
What is the [NO] in an equilibrium mixture of gaseous NO, O2, and NO2 at 500 K that contains 1.5 x 10 –2 M O2 and 4.3 x 10 –3 M NO2?
Do you want more practice?
Here’s what students ask on this topic:
What is the equilibrium constant and how is it calculated?
The equilibrium constant, denoted as K, is a number that represents the ratio of the concentrations of products to reactants at equilibrium for a given chemical reaction at a specific temperature. It is calculated using the formula:
Here, the concentrations of the products and reactants are raised to the power of their respective coefficients in the balanced chemical equation. Note that solids and liquids are not included in this ratio.
How does temperature affect the equilibrium constant?
Temperature has a direct effect on the equilibrium constant (K). If the temperature increases, the value of K will also increase for endothermic reactions, meaning the reaction favors the formation of products. Conversely, for exothermic reactions, an increase in temperature will decrease the value of K, favoring the formation of reactants. Therefore, the equilibrium constant is temperature-dependent, and any change in temperature can shift the position of equilibrium.
What does it mean if the equilibrium constant (K) is greater than 1?
If the equilibrium constant (K) is greater than 1, it indicates that the concentration of products is greater than the concentration of reactants at equilibrium. This means that the reaction favors the formation of products, and the forward reaction is predominant. For example, if K = 10, the products are ten times more concentrated than the reactants.
Why are solids and liquids not included in the equilibrium constant expression?
Solids and liquids are not included in the equilibrium constant expression because their concentrations do not change during the reaction. The concentration of a pure solid or liquid is constant and does not affect the equilibrium position. Therefore, only the concentrations of gases and aqueous solutions are considered when calculating the equilibrium constant.
What happens when the equilibrium constant (K) is equal to 1?
When the equilibrium constant (K) is equal to 1, it means that the concentrations of products and reactants are equal at equilibrium. This indicates that neither the forward nor the reverse reaction is favored, and the system is in a state of dynamic balance. For example, if both the products and reactants have a concentration of 10, then K = 10/10 = 1.
Your GOB Chemistry tutor
- Do the following reactions favor reactants or products at equilibrium? Give relative concentrations at equilib...
- Do the following reactions favor reactants or products at equilibrium? Give relative concentrations at equilib...
- The following diagrams represent two similar reactions that have achieved equilibrium: <.> Calculate th...
- The following diagrams represent two similar reactions that have achieved equilibrium: <.> Write the ex...
- Write the equilibrium constant expressions for the following reactions: 2 CO(g) + O2(g) ⇌ 2 CO2(g)
- Write the equilibrium constant expressions for the following reactions. C(s) + H2O(g) ⇌ CO(g) + H2(g)
- Use your answer from Problem 7.53 to calculate the following: [N2O4] at equilibrium when [NO2] = 0.0250 mol/L
- Use your answer from Problem 7.54 to calculate the following: [O2] at equilibrium when [CO2] = 0.18 mol/L and...
- Oxygen can be converted into ozone by the action of lightning or electric sparks: 3 O2(g) ⇌ 2 O3(g) For this ...
- Magnetite, an iron ore with formula Fe3O4, can be reduced by treatment with hydrogen to yield iron metal and w...
- Ammonia reacts slowly in air to produce nitrogen monoxide and water vapor: NH3(g) + O2(g) ⇌ NO(g) + H2O(g) +...