Scientific Notation - Online Tutor, Practice Problems & Exam Prep

Scientific Notation

Oftentimes, when we deal with calculations in chemistry, we're going to run into the situation where we're dealing with extremely large numbers and extremely small numbers. Now, a convenient way to deal with this is scientific notation. Scientific notation is used to turn these small or large inconvenient numbers into manageable ones. So here we have an example of something written in scientific notation. We say it's 6.88×10-12. What's in red is called our coefficient. The coefficient is just the beginning part of the value that is equal to or greater than 1, but less than 10. Next, we have our base, which is here. This is the portion of the scientific notation value that is always 10. So that number is always going to be 10 if we're writing something in scientific notation. And then finally, the exponent, which we sometimes call the power, this is the number of places the decimal was moved to create the scientific notation value. Now we'll talk about, in a couple of videos, what happens when it's positive versus negative. What effect does that have on my value overall? Another important thing when it comes to this exponent is that it must be expressed as a whole number integer. So negative 12, positive 3, negative 2, can't be decimals or fractions, must be whole numbers. Now that we know the basic layout of scientific notation, click on the next video, and let's take a look at the example question.

Scientific Notation Example 1

So now that we know the major parts of scientific notation, let's put it to practice with this example question. Here it says, which of the following scientific notation values is written correctly? So if we take a look at a, here we have 1.25×10-14. If we look, the coefficient, this part here, is fine. It's a number between 1 and 10. Here our base is 10, but our error is that the exponent is not a whole number integer. It's negative one fourth. This is not written correctly. Next, if we take a look at the very beginning, we see that our coefficient here is a number that is not between 1 and 10. This is not allowed for scientific notation. The base is correct and the exponent is a whole number, but again, the coefficient is not a number between 1 and 10. So, this will not work. For c, we have our coefficient, which is a number between 1 and 10, so this is allowed. Our base is 10 and our exponent is a whole number integer, 3. So, this is a correct way of writing something within scientific notation values. So, this is our answer. If we look at d though, for d, our coefficient again is a number between 1 and 10, but our base here, our base is not 10. It's 2. Remember, if you're writing something in scientific notation, the base is always 10. The exponent is correct, but it's the base that's making it incorrect overall. So again, remember the three components of scientific notation and the limits that they each have. Following that ensures that you write scientific notation correctly every time.

Scientific Notation

Now that we know about scientific notation, it's going to become important on how to convert from scientific notation to standard notation. Now standard notation itself is just the normal way of writing numbers. Okay? So here, in order to go from scientific notation to standard notation, it all deals with looking at the exponent. Now we're going to say here that a positive exponent tells you to make the coefficient value larger. So if we take a look here, we have 7.17×105. Here, 5 is telling me that I need to make the coefficient larger by 5. So we're starting out with 7.17. To make it larger, I'm going to move the decimal place over to the right. So we have to move it 5 spaces. So 1, 2, 3, 4, 5. So our new way of writing this would be 717,000 as our new value.

Now what if the exponent is negative? Well, a negative exponent tells you to make the coefficient value smaller. So if we take a look here, this is negative 7. So we have 3.25. We need to make this number smaller, so we're going to have to move it to the left, and we move it over 7 spaces. So 1, 2, 3, 4, 5, 6, 7. So that's going to be 0.0000325. So, these values here would represent the normal way of writing numbers.

Now, it's inconvenient because you can see how much writing is involved in writing both of these numbers. And if our exponents were even bigger positive or, even more negative value, that'd be more movement of the decimal. That's the whole point of scientific notation. It changes these inconvenient, non-manageable numbers into something that's easier for us to read. Now that we've done this, click on the next video, and let's take a look at a practice question when we put this into practice. Remember, look at the exponent to determine if you want to make the coefficient larger or smaller.

Convert the following scientific notation values into standard notation.

a) 1.25 x 10^-4

b) 3.20 x 10^-9

c) 1.6100 x 10⁴

So now let's take a look at the following practice question. It says convert the following scientific notation values into standard notation. Remember, the goal or the key to this is to look at the exponent. That tells us how many places to move in order to make our coefficient larger or smaller. So if we look at the first one, it's negative 4. So we need to make our coefficient smaller. We have 1.25. In order to make it smaller, I have to move the decimal over to the left side, and I need to move it 4 spaces. So that would be 1, 2, 3, 4. So that means our standard notation value is going to be 0.000125. For the next one, it's negative 9, so we're going to have to move it over to the left 9 spaces. So, yeah, that's a lot of movements. So you can see why scientific notation is so important. It helps make an inconvenient number into something that's more manageable. Here, we're going to have to move it over 9 spaces. I'm going to put 8 zeros. So 1, 2, 3, 4, 5, 6, 7, 8, 9 spaces. So, that is our standard notation value: 320. And then finally, this one is a positive 4, so we need to make the coefficient larger by moving the decimal over 4 spaces. So 1, 2, 3, 4. That'll be 16,100 as our standard notation value. So now that we know how to go from scientific notation to standard notation, what happens when we have to go in reverse? How do we go from standard notation to scientific notation? To find out, click on the next video and let's look at the steps required.

Scientific Notation

Now we're going to take a look at how exactly we change standard notation into scientific notation. The key is to look at the coefficient. We're going to say to convert a number into a scientific notation value, make sure the coefficient is equal to or greater than 1 but less than 10. So what we learned in the very beginning of scientific notation is the key to changing standard notation into scientific notation. So if we take a look here, we're going to say increasing the coefficient makes the exponent value decrease. Alright. So here we have a number of 0.000 145. We need to make sure that that coefficient, which we're going to make, has to fall between 1 and 10. Here is our decimal place. We're going to have to move it 1, 2, 3, 4, 5 spaces, so that we can get 1.45, which is a value between 1 and 10. Now we made the coefficient larger. Since we made the coefficient larger, that means the exponent has to become smaller. So the coefficient increased by 5, so the exponent has to decrease by 5 because they're opposites of one another.

Now, decreasing the coefficient value makes the exponent value increase. So here in this one, there is we could think of there being a decimal point there and we're going to move it over enough spaces in order to make this coefficient a number between 1 and 10. So we're going to move 1, 2, 3, 4, 5, 6, 7, 8 spaces. So that becomes 1.0132500 times 10. Now we moved over 8 spaces in order to make this smaller. So if the coefficient is decreasing by 8 spaces, that means our exponent has to be increasing by 8 spaces. So it'll be a positive 8 here. So that would be the scientific notation value for this number here. Later on, we'll talk about things such as significant figures, which will help us to even simplify this scientific notation even more because there's an awful lot of zeros here at the end. But for now, this would be the entire value that we place to show that we moved the decimal place 8 spaces over to make the coefficient smaller and thereby increasing the exponent by 8.

Now that we've seen these examples, move on to the practice question left at the bottom of the page.

Convert the following standard notation values into scientific notation.

a) 377,000

b) 0.000101

c) 707.82

So now let's take a look at the following practice question. Here it says convert the following standard notation values into scientific notation. So for the first one, we have 377,000. We can assume that we have a decimal here at the end, and we just have to move it enough spaces to make our coefficient a value between 1 and 10. So we move it over 1, 2, 3, 4, 5. We stop there because that gives me 3.77, which is a number between 1 and 10. Now I moved it over 5 spaces to make the coefficient smaller. If I make the coefficient smaller, that means that my exponent becomes larger or it increases. So here we moved over 5 spaces to make coefficients smaller, and my coefficient my exponent increases by 5. So it's 3.77×105. For the next one, here is our decimal point. Again, we need to move it enough spaces to make a coefficient of value between 1 and 10, so I move it 1, 2, 3, 4. Now I am making the coefficient larger, so it means my exponent has to become smaller, has to decrease. And we moved it 4 spaces, so this becomes negative 4. And then finally, we have 707.82. We're going to move this in order to decrease my coefficient to make it a value between 1 and 7. So now it's 7.0782×102. Now I'm making the coefficient decrease, which means the exponent has to increase. So I moved it 2 spaces, and this is a positive 2. So that's 7.0782×102. So just remember, scientific notation is just a way of making very large or very small numbers more manageable and easier to use. Sometimes, though, it's important to know how to do standard notation as well, because sometimes, scientific notation isn't needed. Take to heart some of these questions that we've done, and you'll be able to convert between scientific notation and standard notation quite easily.

Here’s what students ask on this topic:

What is scientific notation and why is it used?

Scientific notation is a method of expressing very large or very small numbers in a more manageable form. It consists of a coefficient (a number between 1 and 10), a base of 10, and an exponent. For example, 6.88 × 10^-12. The coefficient is 6.88, the base is 10, and the exponent is -12. This notation is used to simplify calculations and make it easier to read and write extremely large or small numbers, which is particularly useful in fields like chemistry and physics.

How do you convert a number from scientific notation to standard notation?

To convert a number from scientific notation to standard notation, you need to move the decimal point based on the exponent. If the exponent is positive, move the decimal point to the right. For example, 7.17 × 10⁵ becomes 717,000. If the exponent is negative, move the decimal point to the left. For example, 3.25 × 10^-7 becomes 0.000000325. The number of places you move the decimal point corresponds to the value of the exponent.

How do you convert a number from standard notation to scientific notation?

To convert a number from standard notation to scientific notation, adjust the coefficient to be between 1 and 10 and count the number of places the decimal point moves. For example, 0.000145 becomes 1.45 × 10^-4 by moving the decimal point 4 places to the right. Conversely, 101,325,000 becomes 1.01325 × 10⁸ by moving the decimal point 8 places to the left. The exponent reflects the number of places the decimal point was moved.

What is the significance of the exponent in scientific notation?

The exponent in scientific notation indicates the number of places the decimal point has been moved to convert the number to a coefficient between 1 and 10. A positive exponent means the decimal point was moved to the right, making the number larger. For example, 3.2 × 10³ is 3200. A negative exponent means the decimal point was moved to the left, making the number smaller. For example, 4.5 × 10^-4 is 0.00045. The exponent must always be a whole number.

Why must the exponent in scientific notation be a whole number?

The exponent in scientific notation must be a whole number because it represents the number of places the decimal point is moved. Whole numbers ensure clarity and consistency in the notation. For example, in 6.88 × 10^-12, the exponent -12 indicates the decimal point is moved 12 places to the left. Using whole numbers avoids confusion and maintains the standard format, making it easier to perform calculations and understand the magnitude of the number.