Skip to main content
Ch. 2 - Chemical Principles
Chapter 2, Problem 27.7a

Outline the treatment process for drinking water.

Verified step by step guidance
1
Coagulation and Flocculation: Add chemicals like alum to the water to form sticky particles called flocs, which attract dirt and other particles.
Sedimentation: Allow the flocs to settle to the bottom of the water supply, leaving clear water on top.
Filtration: Pass the clear water through filters of varying compositions (sand, gravel, and charcoal) to remove dissolved particles such as dust, parasites, bacteria, viruses, and chemicals.
Disinfection: Add disinfectants like chlorine or chloramine to kill any remaining bacteria, viruses, and parasites, ensuring the water is safe to drink.
Storage and Distribution: Store the treated water in a reservoir or tank and then distribute it through pipes to homes and businesses, ensuring it remains clean and safe until it reaches the consumer.

Verified Solution

Video duration:
0m:0s
This video solution was recommended by our tutors as helpful for the problem above.
Was this helpful?

Key Concepts

Here are the essential concepts you must grasp in order to answer the question correctly.

Water Treatment Processes

Water treatment involves a series of processes designed to remove contaminants and make water safe for drinking. Key stages include coagulation, sedimentation, filtration, and disinfection. Each step plays a crucial role in reducing pollutants and pathogens, ensuring the water meets health standards.
Recommended video:
Guided course
04:19
1) RNA Processing

Coagulation and Flocculation

Coagulation is the process of adding chemicals, such as alum, to water to bind small particles together into larger aggregates called flocs. This is followed by flocculation, where gentle mixing encourages the formation of these larger particles, which can then be removed more easily during sedimentation.

Disinfection Methods

Disinfection is a critical step in water treatment that aims to eliminate harmful microorganisms. Common methods include chlorination, ultraviolet (UV) light treatment, and ozonation. Each method has its advantages and limitations, and the choice depends on factors like water quality and regulatory requirements.
Recommended video:
Guided course
05:21
Types of Disinfectants