Hey, guys. So we've been working with centripetal forces problems in the last couple of videos. And in this video, I want to show you a specific type of that kind of problem called the flat curve. This happens whenever you have an object that's traveling in a circle like this and there's a force that's keeping it going in a circle. You've definitely experienced this in everyday life. If you've been, like, driving your car and you approach a four-way intersection where there's a roundabout, as you're driving around that roundabout, you're basically just doing a flat curve. So I'm actually going to skip this point and just get back to it in just a second here because now we can kind of understand what this example is going to ask of us. So let's check this out. We're supposed to figure out the maximum speed that a car can drive while rounding a flat curve. So the idea is we want to find vmax for a massive 800 kilograms car that's driving around a flat curve like this. And we have the radius of this curve, which is 50. Now what we're also told is that this car cannot slip. Right? The tires can't slip on the road if the coefficient of static friction is going to be 0.5. So here's what we have. Right? We're trying to figure out this vmax here, and we know that this car, as it's traveling around the flat curve, has a centripetal acceleration. This is ac and this equals v2/r. So, really, our velocity is actually kind of wrapped up inside this acceleration term. So in order to figure out this velocity, we're actually going to have to figure out the ac. In order to do that, we're going to actually have to stick to our steps. We're going to have to draw our free body diagram and then write f equals ma. So let's go ahead and do that. What's the free body diagram look like? Well, for the car, we know we're going to have a weight force that's straight down. This is our mg. And then we're also going to have a normal force from the road. Right? So this is the vertical axis. But we're actually missing one force. There has to be a force that is keeping this object, accelerating centripetally. Remember, if there's an acceleration centripetal, there has to be a force centripetal that's causing it to do that. What is that force? And, And basically, what you need to know about these problems is that the force that keeps these objects traveling in circular motion is static friction. That's why we were given information about the tires not slipping on the road. We were also given the coefficient of static friction. So, basically, the idea is that the force that keeps this object through this car going in a circle is actually the static friction force. So if we were to look at, like, a top view of this road, it would basically look like the road like this. We have our car. And the only force that keeps this object centripetal accelerating is going to be the force of friction. Now we want to figure out the maximum speed that we can go before the start the tires actually start to slip. So that's not just any old friction, that's actually going to be static friction maximum. If we drove any faster than this maximum speed, the tires would start to slip and rub, and then therefore, you'd have kinetic friction. Okay? So let's go ahead and start off with our f equals ma. So we have f equals ma in this centripetal axis right here. And there's really only one force that is keeping this object accelerating in this centripetal direction, and that is the force of friction. And because it points along the same direction as the acceleration, it actually picks up a positive sign. So this is positive sfsmax equals m. And now we're just going to replace this ac with mv2/r. So this is one of those rare situations where our static friction is actually positive because it points in the direction of our acceleration. Okay? So we want to figure out this velocity here. And so we need to figure out everything else about the problem. Unfortunately, we don't know what that static friction maximum is, so we're going to have to expand out that variable. So we know that fsmax is equal to μstatic times the normal. This is equal to mv2/r. And we also know in these problems that if these are the only two forces in the vertical axis, your weight and your normal force, they have to cancel and be equal to each other. So this is μstatic times ng is equal to mv2/r. So we can see here is that our m's are actually going to cancel out, and we can write an expression for this v2 here. So I'm going to do this. I have v2 is equal to once I move the r to the other side. I'm going to write this as g times r times μ static. I like to think of this as gerμ static. Alright. So this is actually going to be a super important equation here. If you know this equation and you get these kinds of flat curves problems like a multiple choice, you'll be able to solve them very quickly using this equation. This is also going to be really important because we're going to talk about this equation in later videos. Okay? So now we just have to go ahead and solve. We have, v is equal to now I'm just going to take the square roots and then plug in all the numbers. So this is 9.8. Our radius is 50, and then our μstatic is 0.5. If you go ahead and solve for this, you're going to get 15.6 meters per second, and that is your answer. If you were traveling any faster than 15.6, then the tires would start to slip, and you would actually start skidding, and your friction would turn into kinetic. So that's it for this video. Let me know if you guys have any questions.
Table of contents
- 0. Math Review31m
- 1. Intro to Physics Units1h 23m
- 2. 1D Motion / Kinematics3h 56m
- Vectors, Scalars, & Displacement13m
- Average Velocity32m
- Intro to Acceleration7m
- Position-Time Graphs & Velocity26m
- Conceptual Problems with Position-Time Graphs22m
- Velocity-Time Graphs & Acceleration5m
- Calculating Displacement from Velocity-Time Graphs15m
- Conceptual Problems with Velocity-Time Graphs10m
- Calculating Change in Velocity from Acceleration-Time Graphs10m
- Graphing Position, Velocity, and Acceleration Graphs11m
- Kinematics Equations37m
- Vertical Motion and Free Fall19m
- Catch/Overtake Problems23m
- 3. Vectors2h 43m
- Review of Vectors vs. Scalars1m
- Introduction to Vectors7m
- Adding Vectors Graphically22m
- Vector Composition & Decomposition11m
- Adding Vectors by Components13m
- Trig Review24m
- Unit Vectors15m
- Introduction to Dot Product (Scalar Product)12m
- Calculating Dot Product Using Components12m
- Intro to Cross Product (Vector Product)23m
- Calculating Cross Product Using Components17m
- 4. 2D Kinematics1h 42m
- 5. Projectile Motion3h 6m
- 6. Intro to Forces (Dynamics)3h 22m
- 7. Friction, Inclines, Systems2h 44m
- 8. Centripetal Forces & Gravitation7h 26m
- Uniform Circular Motion7m
- Period and Frequency in Uniform Circular Motion20m
- Centripetal Forces15m
- Vertical Centripetal Forces10m
- Flat Curves9m
- Banked Curves10m
- Newton's Law of Gravity30m
- Gravitational Forces in 2D25m
- Acceleration Due to Gravity13m
- Satellite Motion: Intro5m
- Satellite Motion: Speed & Period35m
- Geosynchronous Orbits15m
- Overview of Kepler's Laws5m
- Kepler's First Law11m
- Kepler's Third Law16m
- Kepler's Third Law for Elliptical Orbits15m
- Gravitational Potential Energy21m
- Gravitational Potential Energy for Systems of Masses17m
- Escape Velocity21m
- Energy of Circular Orbits23m
- Energy of Elliptical Orbits36m
- Black Holes16m
- Gravitational Force Inside the Earth13m
- Mass Distribution with Calculus45m
- 9. Work & Energy1h 59m
- 10. Conservation of Energy2h 51m
- Intro to Energy Types3m
- Gravitational Potential Energy10m
- Intro to Conservation of Energy29m
- Energy with Non-Conservative Forces20m
- Springs & Elastic Potential Energy19m
- Solving Projectile Motion Using Energy13m
- Motion Along Curved Paths4m
- Rollercoaster Problems13m
- Pendulum Problems13m
- Energy in Connected Objects (Systems)24m
- Force & Potential Energy18m
- 11. Momentum & Impulse3h 40m
- Intro to Momentum11m
- Intro to Impulse14m
- Impulse with Variable Forces12m
- Intro to Conservation of Momentum17m
- Push-Away Problems19m
- Types of Collisions4m
- Completely Inelastic Collisions28m
- Adding Mass to a Moving System8m
- Collisions & Motion (Momentum & Energy)26m
- Ballistic Pendulum14m
- Collisions with Springs13m
- Elastic Collisions24m
- How to Identify the Type of Collision9m
- Intro to Center of Mass15m
- 12. Rotational Kinematics2h 59m
- 13. Rotational Inertia & Energy7h 4m
- More Conservation of Energy Problems54m
- Conservation of Energy in Rolling Motion45m
- Parallel Axis Theorem13m
- Intro to Moment of Inertia28m
- Moment of Inertia via Integration18m
- Moment of Inertia of Systems23m
- Moment of Inertia & Mass Distribution10m
- Intro to Rotational Kinetic Energy16m
- Energy of Rolling Motion18m
- Types of Motion & Energy24m
- Conservation of Energy with Rotation35m
- Torque with Kinematic Equations56m
- Rotational Dynamics with Two Motions50m
- Rotational Dynamics of Rolling Motion27m
- 14. Torque & Rotational Dynamics2h 5m
- 15. Rotational Equilibrium3h 39m
- 16. Angular Momentum3h 6m
- Opening/Closing Arms on Rotating Stool18m
- Conservation of Angular Momentum46m
- Angular Momentum & Newton's Second Law10m
- Intro to Angular Collisions15m
- Jumping Into/Out of Moving Disc23m
- Spinning on String of Variable Length20m
- Angular Collisions with Linear Motion8m
- Intro to Angular Momentum15m
- Angular Momentum of a Point Mass21m
- Angular Momentum of Objects in Linear Motion7m
- 17. Periodic Motion2h 9m
- 18. Waves & Sound3h 40m
- Intro to Waves11m
- Velocity of Transverse Waves21m
- Velocity of Longitudinal Waves11m
- Wave Functions31m
- Phase Constant14m
- Average Power of Waves on Strings10m
- Wave Intensity19m
- Sound Intensity13m
- Wave Interference8m
- Superposition of Wave Functions3m
- Standing Waves30m
- Standing Wave Functions14m
- Standing Sound Waves12m
- Beats8m
- The Doppler Effect7m
- 19. Fluid Mechanics2h 27m
- 20. Heat and Temperature3h 7m
- Temperature16m
- Linear Thermal Expansion14m
- Volume Thermal Expansion14m
- Moles and Avogadro's Number14m
- Specific Heat & Temperature Changes12m
- Latent Heat & Phase Changes16m
- Intro to Calorimetry21m
- Calorimetry with Temperature and Phase Changes15m
- Advanced Calorimetry: Equilibrium Temperature with Phase Changes9m
- Phase Diagrams, Triple Points and Critical Points6m
- Heat Transfer44m
- 21. Kinetic Theory of Ideal Gases1h 50m
- 22. The First Law of Thermodynamics1h 26m
- 23. The Second Law of Thermodynamics3h 11m
- 24. Electric Force & Field; Gauss' Law3h 42m
- 25. Electric Potential1h 51m
- 26. Capacitors & Dielectrics2h 2m
- 27. Resistors & DC Circuits2h 7m
- 28. Magnetic Fields and Forces2h 23m
- 29. Sources of Magnetic Field2h 30m
- Magnetic Field Produced by Moving Charges10m
- Magnetic Field Produced by Straight Currents27m
- Magnetic Force Between Parallel Currents12m
- Magnetic Force Between Two Moving Charges9m
- Magnetic Field Produced by Loops and Solenoids42m
- Toroidal Solenoids aka Toroids12m
- Biot-Savart Law (Calculus)18m
- Ampere's Law (Calculus)17m
- 30. Induction and Inductance3h 37m
- 31. Alternating Current2h 37m
- Alternating Voltages and Currents18m
- RMS Current and Voltage9m
- Phasors20m
- Resistors in AC Circuits9m
- Phasors for Resistors7m
- Capacitors in AC Circuits16m
- Phasors for Capacitors8m
- Inductors in AC Circuits13m
- Phasors for Inductors7m
- Impedance in AC Circuits18m
- Series LRC Circuits11m
- Resonance in Series LRC Circuits10m
- Power in AC Circuits5m
- 32. Electromagnetic Waves2h 14m
- 33. Geometric Optics2h 57m
- 34. Wave Optics1h 15m
- 35. Special Relativity2h 10m
8. Centripetal Forces & Gravitation
Flat Curves
8. Centripetal Forces & Gravitation
Flat Curves - Online Tutor, Practice Problems & Exam Prep
Created using AI
When a car rounds a flat curve, static friction is the key force preventing it from slipping. To find the maximum speed (\(v_{\text{max}}\)) for an 800 kg car on a 50 m radius curve with a static friction coefficient of 0.5, we use the equation \(v^2 = g \cdot r \cdot \mu_s\). Substituting \(g = 9.8 \, \text{m/s}^2\), we find \(v_{\text{max}} \approx 15.6 \, \text{m/s}\). Exceeding this speed causes the tires to slip, transitioning to kinetic friction.
1
concept
Flat Curves
Video duration:
5mPlay a video:
Video transcript
2
Problem
ProblemA truck can go around a flat curve of radius 150m with a maximum speed of 32m/s before slipping. Calculate the maximum speed it can go around a tighter curve of radius 75m.
A
32 m/s
B
515 m/s
C
3.8 m/s
D
22.7 m/s
Do you want more practice?
More setsYour Physics tutor
Additional resources for Flat Curves
PRACTICE PROBLEMS AND ACTIVITIES (5)
- flat (unbanked) curve on a highway has a radius of 170.0 m. A car rounds the curve at a speed of 25.0 m/s. (a)...
- (II) A car drives in a spiral path of gradually decreasing radius in a large empty parking lot. The speed is h...
- A car is heading along a flat slippery road at a speed of 95 km/h. The minimum distance within which it can st...
- A car can just barely turn a corner on an unbanked road at 45 km/h on a dry sunny day. What is the car's maxim...
- A 1500 kg car takes a 50-m-radius unbanked curve at 15 m/s. What is the size of the friction force on the car?