Hey, guys. So in this video, I want to talk about electric fields. It's something that you'll see in your textbooks. You'll need to know how to solve problems with it. But it's also to answer a very important question, which is how do charges exert forces on one another. And the basic answer is that they do this by setting up these things called electric fields. So basically a single charge, which I'll call big Q, is going to produce an electric field. You might see some confusing definitions in textbooks, but basically the idea is it's kind of like information this big Q is setting up this thing called an electric field right that exists in all directions. And then, if you place another charge at some distance, little r away from this produced electric field, then this charge will feel that field and actually have a force on it. So, in other words, it will have a repulsive or attractive force here, which we know from Coulomb's law. So basically what happens is this thing, regardless of whether there's another test charge or another secondary charge to feel it, this thing produces an electric field in all directions. And then when you place a charge inside of that field, it feels a force. And that force that it's felt with the electric field, which is set up by big Q, is just Q times E, in which E has units of Newtons per Coulomb, right? You probably don't need to know that, but there it is anyway. So E has units of Newtons per Coulomb. Okay, now which Q are we going to use in these questions? Well, that Q is always the one that's feeling the force. So the words the secondary charge right here. Now, some of you might be wondering, Whoa, isn't the opposite also happening? Doesn't this Q also produce its own electric field and therefore this one is felt by it, and the answer is yes. So this little Q also produces an electric field that is either felt as an attractive or repulsive force. And this is basically how charges exert forces on one another. You have action-reaction because of these things called electric fields. Okay, so again, I just want to reiterate in problems the Q that you're going to use inside of this F=QU equation is always going to be the one that feels the charge or the electric force. At some distance, little r okay. It's as simple as that. Let's go ahead and take a look at an example. We've got two Coulombs and three Coulombs charge. They're separated by some distance r. So I'm going to go ahead and set these up. I've got two Coulombs, three Coulombs. They're separated by a distance of little r in such a way that the electric field at this point is 10 Newtons per Coulomb. In other words, we have an electric field here at this distance. Oh, sorry, actually have it backward. So this is actually going to be the three Coulomb charge, and this is going to be the two Coulomb charge. Now, the electric field at this distance is just 10 Newtons per Coulomb. And now we have to figure out what is the force on this two Coulomb charge. What does that mean? That means that this is the Q, and this is the big Q. So it all depends on which one is the feeling charge and which one is the producing charge. So this one, the two Coulomb charge, is the feeling charge. So in order to figure out the force, we just need Q times E. So the force is going to be Q, which is two Coulombs times the electric field at this particular point, which we're told is 10 Newtons per Coulomb. And that's just equal to 20 Newtons. Okay, so that's just a simple example. Let's go ahead and get into some more examples involving electric fields.
- 0. Math Review31m
- 1. Intro to Physics Units1h 23m
- 2. 1D Motion / Kinematics3h 56m
- Vectors, Scalars, & Displacement13m
- Average Velocity32m
- Intro to Acceleration7m
- Position-Time Graphs & Velocity26m
- Conceptual Problems with Position-Time Graphs22m
- Velocity-Time Graphs & Acceleration5m
- Calculating Displacement from Velocity-Time Graphs15m
- Conceptual Problems with Velocity-Time Graphs10m
- Calculating Change in Velocity from Acceleration-Time Graphs10m
- Graphing Position, Velocity, and Acceleration Graphs11m
- Kinematics Equations37m
- Vertical Motion and Free Fall19m
- Catch/Overtake Problems23m
- 3. Vectors2h 43m
- Review of Vectors vs. Scalars1m
- Introduction to Vectors7m
- Adding Vectors Graphically22m
- Vector Composition & Decomposition11m
- Adding Vectors by Components13m
- Trig Review24m
- Unit Vectors15m
- Introduction to Dot Product (Scalar Product)12m
- Calculating Dot Product Using Components12m
- Intro to Cross Product (Vector Product)23m
- Calculating Cross Product Using Components17m
- 4. 2D Kinematics1h 42m
- 5. Projectile Motion3h 6m
- 6. Intro to Forces (Dynamics)3h 22m
- 7. Friction, Inclines, Systems2h 44m
- 8. Centripetal Forces & Gravitation7h 26m
- Uniform Circular Motion7m
- Period and Frequency in Uniform Circular Motion20m
- Centripetal Forces15m
- Vertical Centripetal Forces10m
- Flat Curves9m
- Banked Curves10m
- Newton's Law of Gravity30m
- Gravitational Forces in 2D25m
- Acceleration Due to Gravity13m
- Satellite Motion: Intro5m
- Satellite Motion: Speed & Period35m
- Geosynchronous Orbits15m
- Overview of Kepler's Laws5m
- Kepler's First Law11m
- Kepler's Third Law16m
- Kepler's Third Law for Elliptical Orbits15m
- Gravitational Potential Energy21m
- Gravitational Potential Energy for Systems of Masses17m
- Escape Velocity21m
- Energy of Circular Orbits23m
- Energy of Elliptical Orbits36m
- Black Holes16m
- Gravitational Force Inside the Earth13m
- Mass Distribution with Calculus45m
- 9. Work & Energy1h 59m
- 10. Conservation of Energy2h 51m
- Intro to Energy Types3m
- Gravitational Potential Energy10m
- Intro to Conservation of Energy29m
- Energy with Non-Conservative Forces20m
- Springs & Elastic Potential Energy19m
- Solving Projectile Motion Using Energy13m
- Motion Along Curved Paths4m
- Rollercoaster Problems13m
- Pendulum Problems13m
- Energy in Connected Objects (Systems)24m
- Force & Potential Energy18m
- 11. Momentum & Impulse3h 40m
- Intro to Momentum11m
- Intro to Impulse14m
- Impulse with Variable Forces12m
- Intro to Conservation of Momentum17m
- Push-Away Problems19m
- Types of Collisions4m
- Completely Inelastic Collisions28m
- Adding Mass to a Moving System8m
- Collisions & Motion (Momentum & Energy)26m
- Ballistic Pendulum14m
- Collisions with Springs13m
- Elastic Collisions24m
- How to Identify the Type of Collision9m
- Intro to Center of Mass15m
- 12. Rotational Kinematics2h 59m
- 13. Rotational Inertia & Energy7h 4m
- More Conservation of Energy Problems54m
- Conservation of Energy in Rolling Motion45m
- Parallel Axis Theorem13m
- Intro to Moment of Inertia28m
- Moment of Inertia via Integration18m
- Moment of Inertia of Systems23m
- Moment of Inertia & Mass Distribution10m
- Intro to Rotational Kinetic Energy16m
- Energy of Rolling Motion18m
- Types of Motion & Energy24m
- Conservation of Energy with Rotation35m
- Torque with Kinematic Equations56m
- Rotational Dynamics with Two Motions50m
- Rotational Dynamics of Rolling Motion27m
- 14. Torque & Rotational Dynamics2h 5m
- 15. Rotational Equilibrium3h 39m
- 16. Angular Momentum3h 6m
- Opening/Closing Arms on Rotating Stool18m
- Conservation of Angular Momentum46m
- Angular Momentum & Newton's Second Law10m
- Intro to Angular Collisions15m
- Jumping Into/Out of Moving Disc23m
- Spinning on String of Variable Length20m
- Angular Collisions with Linear Motion8m
- Intro to Angular Momentum15m
- Angular Momentum of a Point Mass21m
- Angular Momentum of Objects in Linear Motion7m
- 17. Periodic Motion2h 9m
- 18. Waves & Sound3h 40m
- Intro to Waves11m
- Velocity of Transverse Waves21m
- Velocity of Longitudinal Waves11m
- Wave Functions31m
- Phase Constant14m
- Average Power of Waves on Strings10m
- Wave Intensity19m
- Sound Intensity13m
- Wave Interference8m
- Superposition of Wave Functions3m
- Standing Waves30m
- Standing Wave Functions14m
- Standing Sound Waves12m
- Beats8m
- The Doppler Effect7m
- 19. Fluid Mechanics2h 27m
- 20. Heat and Temperature3h 7m
- Temperature16m
- Linear Thermal Expansion14m
- Volume Thermal Expansion14m
- Moles and Avogadro's Number14m
- Specific Heat & Temperature Changes12m
- Latent Heat & Phase Changes16m
- Intro to Calorimetry21m
- Calorimetry with Temperature and Phase Changes15m
- Advanced Calorimetry: Equilibrium Temperature with Phase Changes9m
- Phase Diagrams, Triple Points and Critical Points6m
- Heat Transfer44m
- 21. Kinetic Theory of Ideal Gases1h 50m
- 22. The First Law of Thermodynamics1h 26m
- 23. The Second Law of Thermodynamics3h 11m
- 24. Electric Force & Field; Gauss' Law3h 42m
- 25. Electric Potential1h 51m
- 26. Capacitors & Dielectrics2h 2m
- 27. Resistors & DC Circuits3h 8m
- 28. Magnetic Fields and Forces2h 23m
- 29. Sources of Magnetic Field2h 30m
- Magnetic Field Produced by Moving Charges10m
- Magnetic Field Produced by Straight Currents27m
- Magnetic Force Between Parallel Currents12m
- Magnetic Force Between Two Moving Charges9m
- Magnetic Field Produced by Loops and Solenoids42m
- Toroidal Solenoids aka Toroids12m
- Biot-Savart Law (Calculus)18m
- Ampere's Law (Calculus)17m
- 30. Induction and Inductance3h 37m
- 31. Alternating Current2h 37m
- Alternating Voltages and Currents18m
- RMS Current and Voltage9m
- Phasors20m
- Resistors in AC Circuits9m
- Phasors for Resistors7m
- Capacitors in AC Circuits16m
- Phasors for Capacitors8m
- Inductors in AC Circuits13m
- Phasors for Inductors7m
- Impedance in AC Circuits18m
- Series LRC Circuits11m
- Resonance in Series LRC Circuits10m
- Power in AC Circuits5m
- 32. Electromagnetic Waves2h 14m
- 33. Geometric Optics2h 57m
- 34. Wave Optics1h 15m
- 35. Special Relativity2h 10m
Electric Field: Study with Video Lessons, Practice Problems & Examples
Electric fields are created by charges, exerting forces on other charges within their vicinity. A positive charge generates an electric field that radiates outward, while a negative charge produces an inward field. The electric field (E) can be calculated using the equation
Intro to Electric Fields
Video transcript
A 1.5μC charge, with a mass of 50g, is in the presence of an electric field that perfectly balances its gravity. What magnitude does the electric field need to be, and in what direction does it need to point?
Electric Field due to a Point Charge
Video transcript
Hey, guys. So now that we've seen what the electric field is and how charges respond to electric fields, we're going to look a little bit more closely at the electric fields of point charges. Okay, you don't need to know that. So basically, the idea is we know that charges produce electric fields, and in previous videos, we were sort of like drawing squiggly lines here. But the reality is, instead of squiggly lines, these positive charges, positive point charges actually produce an electric field that points radially outward from it. The way I like to remember this is that positive people are very outgoing people. So this is the electric field produced by a positive charge, like one coulomb, or something like that. Whereas negative charges are just the opposite. And we just chose this convention, by the way, hundreds of years ago. So, this is just what we established as positive and negative electric fields. So, these things produce fields that point inwards. That's the main difference between them. We've got outgoing and inward fields like this, but you'll definitely need to know that now.
We saw how a single charge, whether it was like this
So we have this equation of the electric field generated by a producing charge
Zero Electric Field due to Two Charges
Video transcript
Hey, guys, let's tackle this problem together. So we've got these two charges which lie on the X-axis, and we're supposed to figure out at what distance or at what point on the X-axis is the electric field going to be zero? But I want you to remember that for this problem, we're going to be using the fact that outward or positive charges produce outward-going electric field lines, they always want to go away. Whereas, negative charges produce inward-going electric field lines.
This is going to be useful because we actually have a positive charge right here and a negative charge right here. So we're going to need to remember which directions those electric fields go in. We've done these kinds of problems before when we were looking at Coulomb's law. So, in order to figure out, basically before we start plugging in numbers, we have to figure out in which region it is possible for the electric fields to cancel out. So, I've got three basic choices: I've got on the left, I've got in the middle, and I've got on the right. Now, if you look at the middle, what's going to happen at this point of interest, this point right here, the electric field from this positive Coulomb charge and the electric field lines are going to point away. So, that means that at this position right here, the electric field from that positive charge is going to be towards the right. You see, it always wants to go away. Whereas the electric field from the negative charge always wants to go towards that charge. So, that means that at this point, it wants to go to the right as well. So, basically, this is the electric field from the negative charge. And there's never going to be a situation in which these things will cancel out. They're always going to add together, no matter where I am along this line between them. So that means that it can't be in this area because they never cancel out.
So let's take a look at the right region now. We have the inward-going electric field lines, so that's going to be E-. And from this positive charge, we have an outward-going electric field line. Now, you might be tempted to say we might be able to find a place where these things cancel out. But I want you to notice that the electric fields for any charges are just k times big Q divided by little r2. So, that means it's the magnitude of the charge divided by the distance between them squared. So this three Coulomb charge is always going to be at a smaller distance from this point of interest relative to this entire distance to the weaker charge. What this means is that at this region here, the magnitude of the negative electric field is always going to be bigger than this positive electric field because it's a larger magnitude of a charge, and it's always going to be a smaller distance because this distance right here is always going to be larger and it's a weaker charge. So, the magnitude of this electric field is always going to be bigger than the magnitude of that electric field. So it's never going to cancel, so it can't be this, and instead, we're going to have to use our last scenario, which is on the left. The magnitude of the electric force goes in this direction, the direction of the electric field.
Wow, and we've got the inward-going electric field from the negative three Coulomb charge. Now, there is possibly a scenario where I could find a distance in which these will cancel out: the weaker charges at a smaller distance, the larger charges at a larger distance so there might be a way for them to balance out. The variable I'm looking for is this distance right here, which is X at what point on the X-axis is the electric field equal to zero? And what I'm going to do is I'm just going to set the origin over here to be zero. So this is just going to be X equals zero, which means I'm probably going to get a negative number, or I'm just going to have to specify 'to the left of the Coulomb charge' or something like that. The condition that I'm trying to solve for is that these things should be equal but opposite in direction to cancel out. So, in other words, the magnitude of the electric field from the positive charge should be equal and opposite to the magnitude of the negative electric field.
All right, so we know what the magnitudes of the electric fields are for This guy over here, it's going to be K. We've got the producing charge, which is the two Coulomb charge. And this is going to be at a distance of X squared. Now, that has to equal the inward-going electric field. That's going to be K times the three Coulombs. Notice how I didn't put the negative sign there because I'm just working with the magnitudes of them. So just set their magnitudes equal to each other. And now this distance right here is actually not going to be X. But it's going to be X plus 7 centimeters squared, so I could just write that. So, I've got X plus 0.07 squared. That's 7 centimeters. Just written in SI.
Right, so now what I can do is I can try to solve for this X variable over here. So, I got this equation and I could go ahead and cancel some stuff out, I got the K's. And now, in order to get this X over on one side, I have to move this thing over, and I have to move the two down, so basically, they just have to trade places. And if I do that, I'm going to just continue writing all this stuff in black because it's going to be a pain if I try to switch colors. So, I've got X plus 0.07 squared, divided by X squared equals 3/2.
Great, now, rather than starting to foil all of this mess out and getting a whole bunch of quadratic terms, things like that, what you can do is realize that both of these terms on the top and bottom are squared, which means that we can take the square root of each side. So, we're going to take the square root, take the square root, and then it just becomes X plus 0.07 over X equals the square root of 3/2. Okay, so now all we have to do is start isolating X. I'm just going to move it over to the other side. This becomes X plus 0.07 equals square root of 3/2 times X. And now all I have to do is subtract this X to the other side. So, by subtracting X, I have 0.07 equals square root of 3/2 X minus X. Now what I can do is pull this X out as a common factor because it appears in both of these terms, so basically, I have 0.07 equaling X times (square root of 3/2 minus 1). Notice how if you distribute this X back inside of both of these terms, you're just going to get back to the expression that you had right above, so it's a good shortcut to basically just pull out that greatest common factor.
Okay, and now what we could do is we could basically just move that over and divide. So we have 0.07 divided by the square root of 3/2 minus one, and if you just plug that stuff in, you should get the X distance, and you should get approximately 0.31 meters or that's just 31 centimeters. But remember we said that it's going to be to the left of that two Coulomb charge. So we just have to specify it's to the left of the two Coulomb charge. And this is the answer. So if there were like an actual coordinate system here, this would be like minus 31 centimeters anyway, but this is actually perfectly fine. If you just left it like that. Let me know if you guys have any questions. And if not, we're going to keep going with some more examples.
If two equal charges are separated by some distance, they form an electric dipole. Find the electric field at the center of an electric dipole, given by the point P in the following figure, formed by a 1C and a −1C charge separated by 1 cm.
Electric Field Above Two Charges (Triangle)
Video transcript
Hey, guys, let's go ahead and work this one out together. We have these two charges right here, one positive one negative. And we're supposed to find out what the electric field is at this point of interest over here. All right, so let's go ahead and do that. We've got a positive charge over here. A negative charge over here. So at this point of interest, we just need to figure out without any just calculations where the electric fields are going to point. So we know from this, uh, charge right here. We know the electric field is going to point off in this direction because it's going outwards, right? It wants to point away from that charge. Whereas over here, the electric field is going to point in this direction towards the negative charge. And that's going to be e minus.
In order to figure out those electric fields, I need the formula. I've got e=kq/r2. So I need to know the distances between the source charge, or the producing charge, and the point of interest right here. Right. So I've got this little r distance over here and I have a triangle. I've got five centimeters and I've got eight centimeters here for the vertical piece. So I can figure out the hypotenuse of this triangle using the Pythagorean theorem. So you work this out, you're going to get 9.4 centimeters. And if you were to do the same thing over here, you would have to do the same exact thing. You know, five and eight, and you have to figure out the hypotenuse. So this is actually starting to look like we have a lot of symmetry in this problem. So we have five and eight, we basically have this sort of, like isosceles triangle.
So let's go ahead and see if we can use symmetry just like we did in the last video, to sort of reduce the amount of work that we have to do. So we need these same charges. So, in other words, the same magnitude of the charges we got the plus one Coulomb and the minus one Coulomb at the same distances. Which means they're going to produce the same electric field, right? And if these things are symmetrically placed around this, these two charges then that means that when we go ahead and break up these electric fields into their components, so ex and ey, we're going to have the angle θ. That's going to be the angle, θ is gonna help us break up these things into the components. But you're also going to have components in the Y direction and the X direction from the negative Coulomb's, the negative piece of the electric field. And that's going to be at an angle θ as well. So in other words, if these things, these test charges and the point of interest, are symmetrically placed, then we're going to actually have the same exact θ for both of them, and what that allows us to do is to eliminate the use of the vertical components. We don't have to worry about them because they're going to cancel out. And instead, what that tells us is that the net electric field is going to point off in this direction. And it's just going to be two times the electric field of the X components in which the X component of that electric field, or the X component of anything, is the magnitude times the cosine of the angle as long as your angle is relative to the X-axis.
So that means that our Enet is just going to be 2×kq/r2×cos(θ). So I have all of these numbers: k is constant, q is the charge, and r is this distance right here. This 9.4 centimeters, all I have to do is to go ahead and figure out what the cosine of this angle in this triangle is. So I have to go and use the triangle. So instead of using this angle right here, we'll have a whole bunch of stuff written out. We can also say that this angle right here is θ because these lines right here are parallel. So this is the same angle θ in the triangle and in any triangle, the way we figure out cosine of θ is if we have the angle, we can just plug it in. But if not, we can use it by relating the sides of the triangle together so we have cosine is the adjacent over hypotenuse. The adjacent side is five, the hypotenuse is 9.4.
Notice how I don't have to convert it to meters or anything like that; I could just plug it in, as meters or centimeters, because this thing is a ratio anyway. So I've got 0.53 for my cosine. So that means that I can actually just plug in this number inside for the cosine of θ. All right? And so now let's go ahead and just plug in all my numbers. I've got 2×8.99×109,1...r distance right here is going to be 0.094...and now for this cosine of θ right here, all you have to do is just substitute 0.53... If you work this out, the net electric field is going to be 1.8×1012N/C. So that's the final answer, and this net electric field points purely in the X direction.
So this is one way that you guys can use symmetry. Get very familiar with it. Watch this video a couple of times. Just so you understand how I was able to work through this symmetry and I'll see you guys in the next one, let me know if you have any questions.
4 charges are arranged as shown in the following figure. Find the magnitude of the electric field at the center of the arrangement, indicated by the point P.
8.99×109 N/C
1.21×1010 N/C
3.24×1010 N/C
8.09×1010 N/C
1.94×1011 N/C
Balancing a Pendulum in Electric Field
Video transcript
Hey, guys, let's get more practice involving electric fields. So we have a charge that's at the end of a pendulum. And this pendulum, we're told, is in equilibrium and suspended inside of a uniform electric field. We are told what the electric field magnitude is and our job is to figure out what is the charge on the end of this pendulum? There are a couple of important things to pick out from this problem. The fact that it's in equilibrium means that the sum of all forces in the X and Y directions is equal to zero. All the forces basically cancel out. We're going to see how we can use the forces to solve this problem. But if we're solving for the charge, Q, there's basically one of two equations that we can use. We can use Coulomb's Law, but we don't have another charge, right? There's no second charge over here. So instead, what we're going to do is we're going to use the electric force is equal to Q times E, the charge times the electric field, which we actually have. So, we're going to use this formula to solve for Q. If we go and rearrange this, the Q is just equal to F divided by the electric field. If I can figure out what this electric force is, then I could basically just plug that in and solve for the charge.
To solve that force, there are a bunch of forces acting on this, so let's go ahead and draw a free body diagram for this. We have an electric field on a point charge, so we know that the force is going to be in the same direction. The reason that it doesn't just fly off is that it's held in place partly by this string that it's attached to, which has some tension. There is also another force due to gravity, because this thing has some mass, mg. Since this object is in equilibrium, which means that all the forces are going to cancel out. In order to set this up first, we have to break up this tension into its components. So we have an X and a Y component, and we get those components Ty and Tx by relating the tension with the cosine or the angle θ that it makes with the X axis. Now, this angle, if you sort of project out this horizontal line, this is a 90-degree angle, this is a 15-degree angle, which means this has to make up the difference between 180 degrees. So this angle is actually 75 degrees. So, the tension in the X direction is going to be T cos(θ) and the T in the Y direction is going to be T sin(θ).
Now we have these components, let's go ahead and set up our equilibrium conditions in the X direction. I have that the sum of all forces in the X direction is equal to zero. So, starting off my forces in the X direction, I have the electric force, which is really what I'm looking for, minus the tension or the X component of the tension. In other words, the electric force here is just equal to the tension times the cosine of the angle. The problem is, I know what the cos(θ) is, I don't know what the tension is. So remember, think back to Newton's laws, whenever we had a situation where we needed one variable in the X direction, we usually went to the Y direction to solve for it. So, we are going to do that. In the Y direction, we have the same exact condition, the sum of all forces in the Y direction is equal to zero. Your Ty, which is going to be your T sin(θ), is equal to mg once you move this to the other side. So now, T is actually equal to mg divided by the sin(θ), and I actually have all these numbers: the mass, g and also sin(θ). So, T equals mg/sin(θ) gives you 0.30 Newtons. Now you can just take this number and then plug it back inside of this formula. The electric force is just equal to 0.30 Newtons times the cosine of the angle, which is 75 degrees. So that means that my electric force is equal to 0.78 Newtons. So now what I can do is I can take this electric force and I just have to plug it back into my initial equation to solve for the charge. Remember, that's my final variable. So, Q is equal to 0.78 divided by 100 Newtons per Coulomb. You should get 7.8 times 10-4 Coulombs. This is, by the way, our final answer.
Let me know what you think about this problem. Let me know if you have any questions. I'll happily explain any steps, and I'll see you guys in the next one.
In the following figure, a mass m is balanced such that its tether is perfectly horizontal. If the mass is m and the angle of the electric field is θ, what is the magnitude of the electric field, E, expressed in terms of m, q, and θ?
Ε = qmg/sinθ
Ε = T/(q cosθ)
E = q sinθ/(mg)
Ε = mg/(q sinθ)
E = mg/(q cosθ)
Do you want more practice?
More setsHere’s what students ask on this topic:
What is an electric field and how is it created?
An electric field is a region around a charged particle where other charges experience a force. It is created by electric charges, with positive charges generating fields that radiate outward and negative charges producing fields that point inward. The strength and direction of the electric field (E) at a point can be calculated using the equation:
where k is Coulomb's constant, Q is the charge, and r is the distance from the charge to the point of interest.
How do you calculate the force on a charge in an electric field?
The force (F) on a charge (Q) in an electric field (E) can be calculated using the equation:
This equation states that the force is the product of the charge and the electric field. The units of the electric field are Newtons per Coulomb (N/C), and the force is measured in Newtons (N).
What is the relationship between Coulomb's law and the electric field?
Coulomb's law describes the force between two point charges, given by:
where k is Coulomb's constant, Q and q are the charges, and r is the distance between them. The electric field (E) created by a single charge (Q) is given by:
When another charge (q) is placed in this field, it experiences a force (F) given by F = qE, which is consistent with Coulomb's law.
How do positive and negative charges affect the direction of the electric field?
Positive charges create electric fields that radiate outward from the charge, while negative charges create fields that point inward toward the charge. This convention was established to standardize the direction of electric fields. The direction of the electric field is crucial for determining the force experienced by other charges placed within the field.
How do you determine the electric field at a point due to multiple charges?
To determine the electric field at a point due to multiple charges, you need to calculate the electric field contribution from each charge separately and then vectorially add them. The electric field due to a single charge (Q) at a distance (r) is given by:
For multiple charges, calculate the electric field from each charge at the point of interest and then add the vector components of these fields to get the resultant electric field.
Your Physics tutor
- Two positive point charges q are placed on the x-axis, one at x = a and one at x = -a. (a) Find the magnitude ...
- A +8.75-mC point charge is glued down on a horizontal frictionless table. It is tied to a -6.50-mC point charg...
- A +8.75-mC point charge is glued down on a horizontal frictionless table. It is tied to a -6.50-mC point charg...
- A very long, straight wire has charge per unit length 3.20 * 10^-10 C/m. At what distance from the wire is the...
- Two positive point charges q are placed on the x-axis, one at x = a and one at x = -a. (b) Derive an expressio...
- A point charge is placed at each corner of a square with side length a. All charges have magnitude q. Two of t...
- A 10.0 nC charge is located at position (x, y)=(1.0 cm, 2.0 cm). At what (x, y) position(s) is the electric fi...
- A small 1.0 g block charged to 75 nC is placed on a 30° inclined plane. The coefficients of static and kinetic...
- An electric field E=200,000î N/C causes the point charge in FIGURE P22.68 to hang at an angle. What is θ?
- Three 1.0 nC charges are placed as shown in FIGURE P22.66. Each of these charges creates an electric field E a...
- A 0.10 g honeybee acquires a charge of +23 pC while flying. b. What electric field (strength and direction) w...
- A −12 nC charge is located at (x, y)=(1.0 cm, 0 cm). What are the electric fields at the positions (x, y)=(5.0...
- A −15 nC charge is at x=+2.0 cm on the x-axis. A second charge q is located somewhere on the x-axis to the lef...
- A thin, horizontal, 10-cm-diameter copper plate is charged to 3.5 nC. If the charge is uniformly distributed o...
- CALC Charge Q is uniformly distributed along a thin, flexible rod of length L. The rod is then bent into the s...
- FIGURE P23.41 is a cross section of two infinite lines of charge that extend out of the page. Both have linear...
- Two 10-cm-diameter charged disks face each other, 20 cm apart. The left disk is charged to −50 nC and the righ...
- (II) An electron moving to the right at 7.5 x 10⁵ m/s enters a uniform electric field parallel to its directio...
- (I) A proton is released in a uniform electric field, and it experiences an electric force of 1.68 x 10⁻¹⁴ N t...
- (II) Determine the magnitude of the acceleration experienced by an electron in an electric field of 756 N/C. H...
- (II) What is the electric field strength at a point in space where a proton experiences an acceleration of 2.4...
- (II) Calculate the electric field at the center of a square 42.5 cm on a side if one corner is occupied by a ―...
- (II) At what position, 𝓍 = 𝓍ₘ , is the magnitude of the electric field along the axis of the ring of Example...
- (II) Estimate the electric field at a point 2.40 cm perpendicular to the midpoint of a uniformly charged 2.00-...
- Consider an oil droplet of mass m and charge q. We want to determine the charge on the droplet in a Millikan-t...
- The identical small spheres shown in FIGURE P22.64 are charged to +100 nC and −100 nC. They hang as shown in a...
- An electret is similar to a magnet, but rather than being permanently magnetized, it has a permanent electric ...
- A point charge q1 = -4.00 nC is at the point x = 0.600 m, y = 0.800 m, and a second point charge q2 = +6.00 nC...
- A -4.00-nC point charge is at the origin, and a second -5.00-nC point charge is on the x-axis at x = 0.800 m. ...
- (a) Calculate the magnitude and direction (relative to the +x-axis) of the electric field in Example 21.6. Ex...
- Electric Field of the Earth. The earth has a net electric charge that causes a field at points near its surfac...
- Electric Field of the Earth. The earth has a net electric charge that causes a field at points near its surfac...
- A charge of -6.50 nC is spread uniformly over the surface of one face of a nonconducting disk of radius 1.25 c...
- The electric field at a point in space is E =(400î+100jˆ) N/C. a. What is the electric force on a proton at t...
- The nuclei of large atoms, such as uranium, with 92 protons, can be modeled as spherically symmetric spheres o...
- A Van de Graaff generator is a device for generating a large electric potential by building up charge on a hol...
- What are the strength and direction of the electric field 1.0 mm from (a) a proton and
- A hollow copper sphere has inner radius 1.0 cm and outer radius 2.5 cm. A 5.0 A current flows radially outward...
- (II) Two point charges, Q₁ = ― 32 μC and Q₂ = +45μC , are separated by a distance of 12 cm. The electric field...
- (II) You are given two unknown point charges, Q₁ and Q₂. At a point on the line joining them, one-third of the...
- (II) A positive charge q is placed at the center of a circular ring of radius R. The ring carries a uniformly ...
- A point charge of mass 0.145 kg, and net charge +3.40 μC, hangs at rest at the end of an insulating cord above...
- Three very large square charged planes are arranged as shown (on edge) in Fig. 21–78. From left to right, the ...
- (II) Determine the direction and magnitude of the electric field at the point P shown in Fig. 21–66. The two p...
- (II) A very long uniformly charged wire (linear charge density λ = 2.5 C/m) lies along the x axis in Fig. 21–5...