A circular antenna has a diameter of 10 cm and is located within a uniform electromagnetic field with a strength of 3.0 mT. The antenna detects a magnetic flux of 1.5 μWb. Determine the angle between the electromagnetic field direction and the circular antenna plane.

A circular conductor with a radius of 2.50 cm is placed in a uniform magnetic field of 1.23 T decreasing gradually at a rate of 0.450 T/s. Calculate the magnitude of the induced electric field in the conductor.

A circular loop is inserted into a magnetic field directed into the page. Initially, the magnetic field has a magnitude of 0.850 T. The rate of decrease of the magnetic field is -0.0400 T/s. Determine the shape of the field lines for the electric field induced.

The figure given shows a conductor pq in contact with metal rails mp and nq with a uniform magnetic field of 0.650 T around it, perpendicular to the plane of the figure.  Find the direction of current flow in the conductor.

A permanent magnet is placed at the midpoint of a coiled wire as shown in the figure below. The coil consists of multiple turns and is connected to a resistor, forming a closed circuit. What effect does moving the magnet away from the coil have on the circuit? Choose the appropriate option.

In the assembly of conductors shown, determine whether the current induced in the ring is clockwise or anticlockwise if I(t) = I₀•e^-kt, k > 0 and t >0.

A 2.0 Ω iron resistor with a 5.0 x 10^-5 kg mass is connected to a 0.20 A current for 20 seconds. Given the specific heat of iron is 449 J/kg K, calculate the temperature increase of the iron resistor.

A high-voltage power line carries electricity at 50 kV. To safely lower this voltage to 500 V for residential use, what ratio of turns should the transformer have between its primary and secondary coils? Additionally, if the transformer were connected in reverse, what voltage would it produce at its output?