>> Hello, class. Professor Anderson here. Let's take a look at a problem which is a person jumping up in the air. So, the way a person jumps up in the air, of course, is they push up with their legs, at the end of that extension they float through the air for a little while, they come back down and they recompress their legs. So, let's model that jump with a force, as a function of time, that looks like this. The person is just standing there and they have some force on the ground. When they jump they exert a positive force. While they are in the air the force on them is and while they are coming down they land and they recompress the force plate that they're standing on and it's perhaps a different value than the initial one. Okay? So, let's give this some real numbers. When they are just standing on this force plate. Let's say their force is 500 Newtons, okay? So, that is their weight. So, that's the first thing we can understand. The weight is, of course, just equal to MG. Let's call that weight W. So, if we know the weight, W, we can solve for the mass. Mass is just their weight over gravity. Now, when they are jumping up and they're starting to push off with their legs, that force goes up and let's say it goes up to 2000 Newtons. And now at the end of that they're in the air, so there is no force on the force plate that they were standing on. So, the force is 0 that whole time. When they come back down and land they start to recompress the force plate and let's give that a number of maybe 3500 Newtons. Now, let's give a couple more givens here. This is the time while they are jumping up. This is the time while they are landing. So, this is when their legs are pushing them up, this middle section is when they are in mid-air and that last part is when they are compressing their legs as they land. Okay? Now, let's ask some questions about this process. Okay. Let's ask the following question, "What is their acceleration going up?" Okay. While they are pushing themselves off the ground, what is that vertical acceleration? We know it has to be a positive number, because they're going to jump up into the air. But how do we figure out what that is? Well, let's go to our free body diagram, okay? If we think about the free body diagram, then when they are pushing themselves up off the ground there is a force of jump, which is equal to, in this case, 2000 Newtons. But there's also a force down, which is equal to their weight. Weight is, of course, equal to MG and we know what that weight is from the earlier numbers, 500 Newtons. All right, so now we can write sum of the forces in the vertical direction is what? F jump minus MG. And all of that has to be equal to the mass times the acceleration going up. All right? So, now we can solve that equation for the acceleration going up. And if we do that, what do we get? We get A up equals F jump minus MG, all over M. And now we know all those numbers. F jump, we are given that from the graph. MG is, of course, just their weight, W. M is apparently their weight divided by G. And now we can plug in all those numbers. F jump was 2000 Newtons. Weight was 500 Newtons. We're going to divide by the weight 500 over G, which is 9.8. We're in SI units here. So, we end up with a number that looks like 29.4 meters per second squared. Okay, so that's their acceleration going up. Let's ask the question now, "What is their acceleration while they are in mid-air?" Well, you probably know the answer to this already, but let's be clear. While they are in mid-air there is only one force that's acting on them and that's gravity. And that force is in the negative direction. That equals the mass times their acceleration while they're in mid-air. And, so, A air, like you suspect, is just negative G. Negative 9.8 meters per second squared. What about when they are landing? Well, we can use almost the exact same equation, because if I think about the free body diagram while they're landing, the force of those legs is still up, gravity is still down and, so, that difference is going to help you decelerate and come back to a stop. So, in fact, we can use the exact same equation. A land is equal to the force during landing minus weight, all over W over G. And we have all those numbers from the graph. F land was 3500 Newtons, so you can plug in those numbers and if you plug in those numbers you should get 58.8 meters per second squared. All right. Let's ask two final questions on this problem. Let's say while they are jumping up they start from rest, they're standing on the ground, and we want to calculate the final speed as they just leave the ground, okay, or as they just leave that force plate. So if they're just leaving the force plate, what is their speed? All right. For that we can go back to our kinematic equations. Okay. And we know that vf equals vi plus at. vi is 0. She starts from rest on the ground. And so vf in this case is just the acceleration going up times the time that it took her to do that jump. And we have those numbers. Right. The acceleration going up we said was 29.4 meters per second squared. And how long did it take her to do that jump? Well, we're going to say it's 0.25 seconds. And if you run those numbers, you should get 7.35 meters per second. Let's ask one final question. How high does that person jump? How high is the jump? All right. Well, again, we can go back to the kinematic equations, and if we think of the person launching themselves, they're going to go up to a height h if they left the ground at v, and we know what that v is. We have it right here. Okay. Let's actually just call it v. We won't call it v sub f because we don't want to be confused when we write this equation over here. vf squared equals vi squared plus 2 times the acceleration in the y direction, yf minus yi. That's one of our kinematic equations. vf squared is 0. When you get to the top of that jump, you're moving at a speed of 0. vi squared is just this v that we just solved for, so we'll call that v. And then we have acceleration due to gravity, which is negative g, and we have the height h, right. y initial is 0, so y final is just h. And now look, you can solve this very quickly for h. We get h is equal to v squared over 2g, and now you know all those numbers. v is right there. g is, of course, 9.8. And if you double-check those numbers yourself, you should get 2.76 meters. Now, is that a realistic number to be able to jump? No. 2.76 meters, that's like 10 feet. Okay. So it's a little bit extreme, but the approach is sound. So hopefully that problem is clear. If you have any questions, come see me in my office. Cheers.
- 0. Math Review31m
- 1. Intro to Physics Units1h 24m
- 2. 1D Motion / Kinematics3h 56m
- Vectors, Scalars, & Displacement13m
- Average Velocity32m
- Intro to Acceleration7m
- Position-Time Graphs & Velocity26m
- Conceptual Problems with Position-Time Graphs22m
- Velocity-Time Graphs & Acceleration5m
- Calculating Displacement from Velocity-Time Graphs15m
- Conceptual Problems with Velocity-Time Graphs10m
- Calculating Change in Velocity from Acceleration-Time Graphs10m
- Graphing Position, Velocity, and Acceleration Graphs11m
- Kinematics Equations37m
- Vertical Motion and Free Fall19m
- Catch/Overtake Problems23m
- 3. Vectors2h 43m
- Review of Vectors vs. Scalars1m
- Introduction to Vectors7m
- Adding Vectors Graphically22m
- Vector Composition & Decomposition11m
- Adding Vectors by Components13m
- Trig Review24m
- Unit Vectors15m
- Introduction to Dot Product (Scalar Product)12m
- Calculating Dot Product Using Components12m
- Intro to Cross Product (Vector Product)23m
- Calculating Cross Product Using Components17m
- 4. 2D Kinematics1h 42m
- 5. Projectile Motion3h 6m
- 6. Intro to Forces (Dynamics)3h 22m
- 7. Friction, Inclines, Systems2h 44m
- 8. Centripetal Forces & Gravitation7h 26m
- Uniform Circular Motion7m
- Period and Frequency in Uniform Circular Motion20m
- Centripetal Forces15m
- Vertical Centripetal Forces10m
- Flat Curves9m
- Banked Curves10m
- Newton's Law of Gravity30m
- Gravitational Forces in 2D25m
- Acceleration Due to Gravity13m
- Satellite Motion: Intro5m
- Satellite Motion: Speed & Period35m
- Geosynchronous Orbits15m
- Overview of Kepler's Laws5m
- Kepler's First Law11m
- Kepler's Third Law16m
- Kepler's Third Law for Elliptical Orbits15m
- Gravitational Potential Energy21m
- Gravitational Potential Energy for Systems of Masses17m
- Escape Velocity21m
- Energy of Circular Orbits23m
- Energy of Elliptical Orbits36m
- Black Holes16m
- Gravitational Force Inside the Earth13m
- Mass Distribution with Calculus45m
- 9. Work & Energy1h 59m
- 10. Conservation of Energy2h 54m
- Intro to Energy Types3m
- Gravitational Potential Energy10m
- Intro to Conservation of Energy32m
- Energy with Non-Conservative Forces20m
- Springs & Elastic Potential Energy19m
- Solving Projectile Motion Using Energy13m
- Motion Along Curved Paths4m
- Rollercoaster Problems13m
- Pendulum Problems13m
- Energy in Connected Objects (Systems)24m
- Force & Potential Energy18m
- 11. Momentum & Impulse3h 40m
- Intro to Momentum11m
- Intro to Impulse14m
- Impulse with Variable Forces12m
- Intro to Conservation of Momentum17m
- Push-Away Problems19m
- Types of Collisions4m
- Completely Inelastic Collisions28m
- Adding Mass to a Moving System8m
- Collisions & Motion (Momentum & Energy)26m
- Ballistic Pendulum14m
- Collisions with Springs13m
- Elastic Collisions24m
- How to Identify the Type of Collision9m
- Intro to Center of Mass15m
- 12. Rotational Kinematics2h 59m
- 13. Rotational Inertia & Energy7h 4m
- More Conservation of Energy Problems54m
- Conservation of Energy in Rolling Motion45m
- Parallel Axis Theorem13m
- Intro to Moment of Inertia28m
- Moment of Inertia via Integration18m
- Moment of Inertia of Systems23m
- Moment of Inertia & Mass Distribution10m
- Intro to Rotational Kinetic Energy16m
- Energy of Rolling Motion18m
- Types of Motion & Energy24m
- Conservation of Energy with Rotation35m
- Torque with Kinematic Equations56m
- Rotational Dynamics with Two Motions50m
- Rotational Dynamics of Rolling Motion27m
- 14. Torque & Rotational Dynamics2h 5m
- 15. Rotational Equilibrium3h 39m
- 16. Angular Momentum3h 6m
- Opening/Closing Arms on Rotating Stool18m
- Conservation of Angular Momentum46m
- Angular Momentum & Newton's Second Law10m
- Intro to Angular Collisions15m
- Jumping Into/Out of Moving Disc23m
- Spinning on String of Variable Length20m
- Angular Collisions with Linear Motion8m
- Intro to Angular Momentum15m
- Angular Momentum of a Point Mass21m
- Angular Momentum of Objects in Linear Motion7m
- 17. Periodic Motion2h 9m
- 18. Waves & Sound3h 40m
- Intro to Waves11m
- Velocity of Transverse Waves21m
- Velocity of Longitudinal Waves11m
- Wave Functions31m
- Phase Constant14m
- Average Power of Waves on Strings10m
- Wave Intensity19m
- Sound Intensity13m
- Wave Interference8m
- Superposition of Wave Functions3m
- Standing Waves30m
- Standing Wave Functions14m
- Standing Sound Waves12m
- Beats8m
- The Doppler Effect7m
- 19. Fluid Mechanics2h 27m
- 20. Heat and Temperature3h 7m
- Temperature16m
- Linear Thermal Expansion14m
- Volume Thermal Expansion14m
- Moles and Avogadro's Number14m
- Specific Heat & Temperature Changes12m
- Latent Heat & Phase Changes16m
- Intro to Calorimetry21m
- Calorimetry with Temperature and Phase Changes15m
- Advanced Calorimetry: Equilibrium Temperature with Phase Changes9m
- Phase Diagrams, Triple Points and Critical Points6m
- Heat Transfer44m
- 21. Kinetic Theory of Ideal Gases1h 50m
- 22. The First Law of Thermodynamics1h 26m
- 23. The Second Law of Thermodynamics3h 11m
- 24. Electric Force & Field; Gauss' Law3h 42m
- 25. Electric Potential1h 51m
- 26. Capacitors & Dielectrics2h 2m
- 27. Resistors & DC Circuits3h 8m
- 28. Magnetic Fields and Forces2h 23m
- 29. Sources of Magnetic Field2h 30m
- Magnetic Field Produced by Moving Charges10m
- Magnetic Field Produced by Straight Currents27m
- Magnetic Force Between Parallel Currents12m
- Magnetic Force Between Two Moving Charges9m
- Magnetic Field Produced by Loops andSolenoids42m
- Toroidal Solenoids aka Toroids12m
- Biot-Savart Law (Calculus)18m
- Ampere's Law (Calculus)17m
- 30. Induction and Inductance3h 37m
- 31. Alternating Current2h 37m
- Alternating Voltages and Currents18m
- RMS Current and Voltage9m
- Phasors20m
- Resistors in AC Circuits9m
- Phasors for Resistors7m
- Capacitors in AC Circuits16m
- Phasors for Capacitors8m
- Inductors in AC Circuits13m
- Phasors for Inductors7m
- Impedance in AC Circuits18m
- Series LRC Circuits11m
- Resonance in Series LRC Circuits10m
- Power in AC Circuits5m
- 32. Electromagnetic Waves2h 14m
- 33. Geometric Optics2h 57m
- 34. Wave Optics1h 15m
- 35. Special Relativity2h 10m
6. Intro to Forces (Dynamics)
Vertical Forces & Acceleration
Video duration:
11mPlay a video:
Related Videos
Related Practice