In this video, we're going to introduce osmosis. And so osmosis is a type of passive diffusion, which means that absolutely no energy is required for osmosis to occur. Now, osmosis is defined as the passive diffusion of a solvent across a semipermeable membrane. Now recall that solvents are substances that dissolve other substances, and usually in biology the solvent is going to be water. And so really we can define osmosis as the passive diffusion of water across a semi permeable membrane such as a biological membrane or a cell membrane. Now really the direction that water will flow across that semipermeable membrane or biological membrane will depend on the tonicity of the solution. And so the tonicity is defined as the relative concentration of solute dissolved in the solutions. And when it comes to tonicity, really there are 3 terms that you all should know and we have these three terms down below. And what you'll notice about all three of these terms is that they all end in tonic, and tonic is just referring to the tenacity. And so, what you'll notice is the difference between these three terms is going to be the prefix that comes right before, and so that's why we have the prefix as interactive. And so the first term that you all need to know when it comes to tonicity is the term hypotonic. Now hypo is a prefix that means low and it even rhymes with low, hypolo. And so hypotonic solutions are going to have lower solute concentrations. Now the second term that you all should know is isotonic. And iso is a prefix that means equal. And so isotonic solutions are going to have an equal solute concentration. The 3rd and final term that you need to know when it comes to tonicity is hypertonic solution. And hyper kind of sounds like hypo, but hypo round rhymes with low, but hyper does not rhyme with low. So hyper is actually going to mean higher solute concentrations. And so what you'll notice is that lower, equal, and higher are all words of comparison. Something can't be lower unless it's lower than something else. Something can't be equal unless it's equal to something else, and something can't be higher unless it's higher than something else. And so essentially what we're saying is that lower, equal, and higher are words of comparison, you need to be comparing at least 2 regions and the same goes with hypo, iso and hypertonic. You need to be using these words when you're comparing 2 regions. Now the 2 regions that we're typically going to be comparing are the inside of the cell, that's region number 1, and the second region that we'll be comparing is the region on the outside of the cell or the surrounding solution outside of the cell. So down below in our example, notice that it's asking us to label the tenacity of the outside solution on the outside of the cell with respect to the solution on the inside of the cell. So we need to be comparing the outside solution on the outside of the cell with the inside of the cell, which would be over here, and we'll be doing that in each of these three scenarios down below. So when we take a look at this first scenario over here on the left hand side, notice that there are these green solutes, and there are only 2 green solutes on the outside. Whereas on the inside, there's a much higher concentration of these green solutes. And so because the outside has a lower solute concentration than the inside, we can label the outside solution. We're labeling the outside solution here and the outside is lower, so it's going to be hypotonic. The outside solution will be hypotonic because it has a lower solute concentration than the inside of the cell, which has a higher solute concentration. Remember, the solutes here are the green circles. Now moving on to this scenario here in the middle, again we're gonna be labeling the outside solution. And what you'll notice is that the outside solution has a concentration that's pretty much equal to the concentration of solute on the inside. And so because the outside solution and inside solution have equal solute concentrations, that means that the outside solution will be isotonic with respect to the inside. So in here, in the middle, we can label this as isotonic. The outside is isotonic with respect to the inside. And then notice over here in the final, image over here on the right hand side, once again, we're labeling the outside solution, and notice that the outside solution has a much higher concentration than the inside. And so, that means that the outside, because it's higher, it's going to be hypertonic. And so we can label the outside solution hypertonic here, and that will be the outside solution once again because it has a higher concentration of solute than the inside. And so now what we can do now that we've labeled the outside solution with all 3 of these terms, and remember the outside solution is gonna be here in all three cases, we can now try to label the inside solutions for each of these. And so, when you take a look at the inside of these, notice that the inside here has a higher concentration with respect to the outside, which has a lower concentration. So the inside of the cell here, because it has a higher solute concentration, it's going to be hypertonic. So we can label the inside here as hyper. I'm just gonna put hyper here, just to save some space, but it would be hypertonic. So now let's label the inside over here. Well, the inside here has an equal solute concentration with respect to the outside. So that means that the inside is also going to be isotonic, but I'll just put iso here just for short. And then over here, labeling the inside solution, notice that the inside here has a lower solute concentration than the outside, which has a higher solute concentration. And if it had if the inside has a lower solute concentration, that means it will be hypotonic on the inside. And so here, we can label the inside as hypotonic. And so you can see that these words are words of comparison once again. You must be comparing 2 regions, and usually those regions are going to be the outside of the cell with the inside of the cell. And so this here concludes our introduction to osmosis and as we move forward we'll be able to continue to talk more and more about now, that we know about the tonicity we can talk about, the direction of water flow. So we'll talk more about that in our next video and I'll see you guys there.
Osmosis - Online Tutor, Practice Problems & Exam Prep
Osmosis
Video transcript
Osmosis Example 1
Video transcript
Alright. So here we have an example problem that's asking, what is the tenacity of the outside solution in comparison to the inside of the cell? And we've got these 4 potential answer options down below. Now, of course, when we look at option d, it says electrotonic, which is not a word that we described in our last lesson video. So for sure, we know that we can eliminate answer option d. But hypotonic, isotonic, and hypertonic are all terms that we talked about in our last lesson video. So it's going to be between one of these three answers.
And so when we take a look at this image down below, what we need to notice is that there is a beaker, and the beaker has an outside solution here, and then it has a cell, a red blood cell right here in the middle. This image is indicating that the outside solution is 10% solute and it indicates that inside of the red blood cell is 0.1% solute. So what we need to realize is that 10% and 0.1%, when we compare these two numbers, 10% is higher. It is a higher solute concentration, and 0.1% solute is lower.
Recall from our last lesson video that isotonic is a word that means equal solute concentrations. But because 10% solute is higher than 0.1% solute, they are not equal to each other. 10% is not equal to 0.1%. So we know that we can eliminate answer option b, isotonic. It would be isotonic if they both had the exact same percentage of solute, the same concentration of solute.
What we need to realize here is that this problem is specifically asking us to label the tonicity of the outside solution. So we need to focus on the outside solution. The outside solution is 10% Solute. It is a higher Solute Concentration. And so recall the word that means higher solute concentration is hypertonic. Hypertonic means higher solute concentration, and so that means that the outside solution, the one that we're trying to label here, is going to be hypertonic with respect to the inside of the cell. Thus, the correct answer here is going to be answer option c.
This, of course, means that the inside of the red blood cell is going to be hypotonic. So inside here, we can say it is hypotonic, and the outside here, we can say is hypertonic. And so, again, we're labeling the outside solution, so it will be hypertonic, and option a is not going to be correct for the outside solution. So, option c, hypertonic, is the correct answer for this example, and I'll see you guys in our next video.
Direction of Osmosis
Video transcript
So now that we've introduced tonicity in our last lesson video, in this video we're going to talk about how tonicity affects the direction of osmosis. And so what we need to recall from our previous lesson videos is that biological membranes are semi-permeable, which means that some things can get across the membrane, but other things cannot get across the membrane. And so, if the solutes that are in a solution cannot diffuse across the membrane from areas of high concentration to areas of low concentration, then osmosis is going to occur. And recall, osmosis is the diffusion of water across the membrane. And so here's what you guys need to know: Water will always move from hypotonic solutions towards hypertonic solutions. And so this is the direction of water movement, from hypo towards hypertonic solutions. And so this is going to allow water to move towards the more concentrated solution of solute in order to dilute that solution and it will continue to move towards that solution until it becomes isotonic. And so essentially the water is moving to help to try to create equal solute concentrations in both solutions.
Now, you might be thinking, wait a second, doesn't that go against the natural tendency of diffusion? Don't substances always diffuse from high concentration to low concentration? But here you're telling me that it's diffusing from low concentration to high concentration. So how does that make sense? Well, what's important to keep in mind is that hypotonic and hypertonic are terms that refer to the solute concentration. However, water is not the solute, water is the solvent. And so what's important to keep in mind is that water is still moving from areas of higher concentration of water towards lower concentrations of water. So let's take a look at this in a little bit more depth here to clear this up. Hypotonic solutions, they do have lower solute concentrations like we described in our last lesson video. However, hypotonic solutions, even though they have lower solute concentrations, they actually have higher water concentrations. And hypertonic solutions, they do have higher solute concentration just like what we described in our last lesson video. However, hypertonic solutions, although they have higher solute concentrations, they have lower water concentrations. And so what's really important to just realize here is that water is the solvent, whereas solutes are not the solvent. And so, these terms hypo and hyper are referring to the concentrations of solute. However, water is not the concentration of solute and water is still going to be moving from areas of higher concentration of water towards lower concentrations of water. So once again, let's take a look at our image down below to try to clear this up even further. And so notice what we have here down the middle is a biological membrane, which is semi-permeable, meaning that some things can cross the membrane but other things cannot cross the membrane. And so in a scenario where the solutes cannot cross the membrane. Although the solutes would love to diffuse from higher concentration to lower concentration across the membrane, they can't because they're being blocked. And so in some scenarios, if the solutes cannot diffuse across the membrane, instead of the solutes diffusing from high to low concentration, because they can't, what's going to happen is water is going to move instead. And in areas that are hypotonic, yes, they have lower solute concentration because hypotonic is referring to the lower solute concentration, but it turns out that they have actually have a higher water concentration. They have higher water. And hypertonic solutions, yes, they have a higher solute concentration because, remember, hypertonic is referring to the solute concentration being higher. However, higher solute concentration means that it's going to have lower water concentration. And by the way, the brackets that you see here, just mean the concentration of. And so when you see something in brackets like water in brackets, it means concentration of water, and solute in brackets means concentration of solute. And so remember what we said, what you need to know is right here. Water will always move from hypo towards hypertonic solutions. And so over here on the left we have hypo, over here on the right we have hyper. So water is always going to flow in this direction. And so if you're able to remember, water flows from hypo towards hyper, then you'll be good on most of your osmosis questions. And so we'll be able to get some practice applying the concepts that we've learned here, but once again, keep in mind, water always flows from hypo towards hypertonic solutions.
So that being said, I'll see you all in our next video.
Osmosis is best defined as the movement of:
Which direction would you expect water to move across the cell membrane?
Environmental Tonicity Affects Cells
Video transcript
So in our previous lesson videos, we introduced tonicity and the direction of osmosis across a membrane. How water flows from hypotonic solutions towards hypertonic solutions. In this video, we're going to talk about how the environmental tonicity affects cells. We're mainly going to be focusing on the outside environment that surrounds a cell. If the outside environment that surrounds a cell is hypotonic, then in this scenario, water is going to enter the cells and cause the cells to swell up or enlarge like a hippopotamus. You can think that hypotonic environments cause cells to swell up or enlarge like a hippopotamus. For animal cells that do not have a cell wall, they could potentially lyse or burst under these conditions. You can think of it like a balloon. If the cell was a balloon, if you blow too much air into a balloon then it's going to expand, enlarge or swell like a hippopotamus. But if you blow too much air into it, then it could potentially pop open. The same goes for cells, if too much water enters the cells, they could swell up too much. If they swell up too much, they could potentially lyse or burst. For animal cells that do not have cell walls, they do not prefer hypotonic environments because they could potentially lyse or burst, which could kill them. However, for plant cells that do have cell walls, the cell walls can prevent the expansion of the cell membrane. That means that the cell membrane is protected from lysing or bursting open with plant cell walls. Plant cell walls and plant cells actually prefer hypotonic environments, and this is because they do not lyse or burst open, and when the water enters the plant cells it actually increases what is known as turgor pressure. Turgor pressure is pretty much defined as the water pressure that's on the cell membrane, and this allows plants to have their upright and healthy structure.
Let's take a look at our image down below to clear up some of these ideas, and we're gonna be focusing mainly on the left hand side of the image over here. When the outside environment that is surrounding a cell is hypotonic, that could potentially cause a cell to swell up like a hippopotamus. Notice that we're showing you an animal cell and notice that it's a blood cell and water is moving towards the inside of the cell in the hypotonic environment. Notice that when water goes into the cell, just like blowing air into a balloon, the cell is going to expand. But if it expands too much, it could potentially cause cell lysis, essentially causing the cell to burst open, killing the cell. And that's exactly what's happening right here with this animal cell. Animal cells, because they do not have cell walls, they could undergo cell lysis and that could kill the cell, and so animal cells do not prefer hypotonic environments. However, notice down below what we're showing is a plant in a plant cell, and plant cells have a cell wall that surrounds the cell membrane, and the cell wall prevents the expansion of the cell membrane, and so it prevents cell lysis. Plant cells do not have to worry about lysing in hypotonic environments. Instead, plant cells prefer hypotonic environments, and the reason for that is because it leads to high turgor pressure. The cell membrane that is surrounding the cell here is applying pressure to the cell wall that surrounds the cell as well. That allows the cell to take up an upright, healthy structure like what we see here. Plants prefer to be in hypotonic environments, but animal cells do not like hypotonic environments.
Now let's take a look at the second type of environment. If the outside environment that is surrounding a cell is isotonic, then in that scenario, water is going to both enter and exit the cell at equal rates. That means that if water's going in and leaving the cell at equal rates, then the cell is not really going to change in size. This is preferred by animal cells, like our blood cells. Let's take a look at our image down below here in the middle where we're showing you the conditions where the outside environment surrounding the cell is isotonic. In this scenario, water is going to both enters and exit cells at equal rates, which means that the cell is not going to change in size. For animal cells, like these red blood cells that we're showing you here, they prefer isotonic environments. Now taking a look at the plant cell down below when it is in an isotonic environment, water will go into the cell and leave the cell at equal rates, and so the plant cell is not going to change in size. However, notice that the cell membrane here is not applying a lot of pressure to the cell wall. There are these gaps between the cell membrane and the cell wall, and so that means that there's not a really high amount of turgor pressure, and plants don't prefer isotonic environments because it doesn't allow them to have the high turgor pressure that allows them to have their upright healthy formation.
Now let's take a look at the final environment. If the outside environment that is surrounding a cell is hypertonic. In that scenario, water is going to exit cells. When water exits cells, it's almost like deflating a balloon, and so the balloon will get smaller and the cell would also get smaller and shrivel up and shrink down. Also because water is exiting, that's going to cause the cells to dehydrate. They're going to be losing water. This is very similar to how a hyperactive child gets dehydrated. You can think hyper and hyper can lead to dehydration with water leaving the cell. Let's take a look at our image down below over here on the right hand side where the outside environment surrounding the cell is hypertonic. Once again, water is going to be leaving the cell, exiting the cell, And when it does that, the cell itself is going to shrivel up and shrink down and get dehydrated just like all of these cells here. We can say that cells will dehydrate in this environment. This means that animal cells do not prefer hypertonic environments because dehydration can lead to cell death. Now down below here with the plant cell, we're also showing the plant cell in a hypertonic environment. Once again, water is going to be leaving the plant cell in this scenario. In this scenario, what you'll notice is that the cell membrane, which is right here, is not applying a lot of pressure at all to the cell wall that surrounds it. And so there is a really low amount of turgor pressure. That will cause plants to lose their upright healthy structure and begin to wilt and die off as well. Neither animal nor plant cells prefer hypertonic environments because it'll lead to dehydration and low turgor pressure for plants. What you can see here is that plant cells prefer hypotonic environments. Animal cells here prefer isotonic environments, and neither plant nor animal cells prefer hypertonic environments. This concludes our lesson on how environmental tonicity affects cells, and we'll be able to get some practice applying these concepts as we move forward in our course. I'll see you all in our next video.
Plants become turgid when placed in this type of solution:
What would you expect to happen to the cell under the following conditions?