In this video, let's talk about waxes. Now waxes are simple lipids composed of a long chain alcohol and a long chain fatty acid. The fatty acid and the alcohol are attached by an ester bond. If we take a look here, this part is our ester bond, where we have our carbonyl connected to an oxygen, and then here we have our long chain alcohol. And then over here on this side, we have our fatty acid. Remember that we have our lipids, which are broken down into our fatty acids and steroids. Underneath fatty acids when we break it down further, we have our waxes. We also have these three other classifications that lie below fatty acids, but we're not concerned with them for now. For right now, we're looking at waxes themselves, which again, we have an ester bond connecting together our fatty acid and our long chain alcohol. Now, here we're going to say that waxes possess repellent properties. And we're going to say they form protective coatings on feathers of birds and leaves of plants. So, just remember when it comes to waxes, they are a further classification, a more specific classification of fatty acids themselves. And when we talk about them, we're looking at an ester bond connecting a fatty acid and a long chain alcohol.
- 1. Matter and Measurements4h 29m
- What is Chemistry?5m
- The Scientific Method9m
- Classification of Matter16m
- States of Matter8m
- Physical & Chemical Changes19m
- Chemical Properties8m
- Physical Properties5m
- Intensive vs. Extensive Properties13m
- Temperature (Simplified)9m
- Scientific Notation13m
- SI Units (Simplified)5m
- Metric Prefixes24m
- Significant Figures (Simplified)11m
- Significant Figures: Precision in Measurements7m
- Significant Figures: In Calculations19m
- Conversion Factors (Simplified)15m
- Dimensional Analysis22m
- Density12m
- Specific Gravity9m
- Density of Geometric Objects19m
- Density of Non-Geometric Objects9m
- 2. Atoms and the Periodic Table5h 23m
- The Atom (Simplified)9m
- Subatomic Particles (Simplified)12m
- Isotopes17m
- Ions (Simplified)22m
- Atomic Mass (Simplified)17m
- Atomic Mass (Conceptual)12m
- Periodic Table: Element Symbols6m
- Periodic Table: Classifications11m
- Periodic Table: Group Names8m
- Periodic Table: Representative Elements & Transition Metals7m
- Periodic Table: Elemental Forms (Simplified)6m
- Periodic Table: Phases (Simplified)8m
- Law of Definite Proportions9m
- Atomic Theory9m
- Rutherford Gold Foil Experiment9m
- Wavelength and Frequency (Simplified)5m
- Electromagnetic Spectrum (Simplified)11m
- Bohr Model (Simplified)9m
- Emission Spectrum (Simplified)3m
- Electronic Structure4m
- Electronic Structure: Shells5m
- Electronic Structure: Subshells4m
- Electronic Structure: Orbitals11m
- Electronic Structure: Electron Spin3m
- Electronic Structure: Number of Electrons4m
- The Electron Configuration (Simplified)22m
- Electron Arrangements5m
- The Electron Configuration: Condensed4m
- The Electron Configuration: Exceptions (Simplified)12m
- Ions and the Octet Rule9m
- Ions and the Octet Rule (Simplified)8m
- Valence Electrons of Elements (Simplified)5m
- Lewis Dot Symbols (Simplified)7m
- Periodic Trend: Metallic Character4m
- Periodic Trend: Atomic Radius (Simplified)7m
- 3. Ionic Compounds2h 18m
- Periodic Table: Main Group Element Charges12m
- Periodic Table: Transition Metal Charges6m
- Periodic Trend: Ionic Radius (Simplified)5m
- Periodic Trend: Ranking Ionic Radii8m
- Periodic Trend: Ionization Energy (Simplified)9m
- Periodic Trend: Electron Affinity (Simplified)8m
- Ionic Bonding6m
- Naming Monoatomic Cations6m
- Naming Monoatomic Anions5m
- Polyatomic Ions25m
- Naming Ionic Compounds11m
- Writing Formula Units of Ionic Compounds7m
- Naming Ionic Hydrates6m
- Naming Acids18m
- 4. Molecular Compounds2h 18m
- Covalent Bonds6m
- Naming Binary Molecular Compounds6m
- Molecular Models4m
- Bonding Preferences6m
- Lewis Dot Structures: Neutral Compounds (Simplified)8m
- Multiple Bonds4m
- Multiple Bonds (Simplified)6m
- Lewis Dot Structures: Multiple Bonds10m
- Lewis Dot Structures: Ions (Simplified)8m
- Lewis Dot Structures: Exceptions (Simplified)12m
- Resonance Structures (Simplified)5m
- Valence Shell Electron Pair Repulsion Theory (Simplified)4m
- Electron Geometry (Simplified)8m
- Molecular Geometry (Simplified)11m
- Bond Angles (Simplified)11m
- Dipole Moment (Simplified)15m
- Molecular Polarity (Simplified)7m
- 5. Classification & Balancing of Chemical Reactions3h 17m
- Chemical Reaction: Chemical Change5m
- Law of Conservation of Mass5m
- Balancing Chemical Equations (Simplified)13m
- Solubility Rules16m
- Molecular Equations18m
- Types of Chemical Reactions12m
- Complete Ionic Equations18m
- Calculate Oxidation Numbers15m
- Redox Reactions17m
- Spontaneous Redox Reactions8m
- Balancing Redox Reactions: Acidic Solutions17m
- Balancing Redox Reactions: Basic Solutions17m
- Balancing Redox Reactions (Simplified)13m
- Galvanic Cell (Simplified)16m
- 6. Chemical Reactions & Quantities2h 35m
- 7. Energy, Rate and Equilibrium3h 46m
- Nature of Energy6m
- First Law of Thermodynamics7m
- Endothermic & Exothermic Reactions7m
- Bond Energy14m
- Thermochemical Equations12m
- Heat Capacity19m
- Thermal Equilibrium (Simplified)8m
- Hess's Law23m
- Rate of Reaction11m
- Energy Diagrams12m
- Chemical Equilibrium7m
- The Equilibrium Constant14m
- Le Chatelier's Principle23m
- Solubility Product Constant (Ksp)17m
- Spontaneous Reaction10m
- Entropy (Simplified)9m
- Gibbs Free Energy (Simplified)18m
- 8. Gases, Liquids and Solids3h 25m
- Pressure Units6m
- Kinetic Molecular Theory14m
- The Ideal Gas Law18m
- The Ideal Gas Law Derivations13m
- The Ideal Gas Law Applications6m
- Chemistry Gas Laws16m
- Chemistry Gas Laws: Combined Gas Law12m
- Standard Temperature and Pressure14m
- Dalton's Law: Partial Pressure (Simplified)13m
- Gas Stoichiometry18m
- Intermolecular Forces (Simplified)19m
- Intermolecular Forces and Physical Properties11m
- Atomic, Ionic and Molecular Solids10m
- Heating and Cooling Curves30m
- 9. Solutions4h 10m
- Solutions6m
- Solubility and Intermolecular Forces18m
- Solutions: Mass Percent6m
- Percent Concentrations10m
- Molarity18m
- Osmolarity15m
- Parts per Million (ppm)13m
- Solubility: Temperature Effect8m
- Intro to Henry's Law4m
- Henry's Law Calculations12m
- Dilutions12m
- Solution Stoichiometry14m
- Electrolytes (Simplified)13m
- Equivalents11m
- Molality15m
- The Colligative Properties15m
- Boiling Point Elevation16m
- Freezing Point Depression9m
- Osmosis16m
- Osmotic Pressure9m
- 10. Acids and Bases3h 29m
- Acid-Base Introduction11m
- Arrhenius Acid and Base6m
- Bronsted Lowry Acid and Base18m
- Acid and Base Strength17m
- Ka and Kb12m
- The pH Scale19m
- Auto-Ionization9m
- pH of Strong Acids and Bases9m
- Acid-Base Equivalents14m
- Acid-Base Reactions7m
- Gas Evolution Equations (Simplified)6m
- Ionic Salts (Simplified)23m
- Buffers25m
- Henderson-Hasselbalch Equation16m
- Strong Acid Strong Base Titrations (Simplified)10m
- 11. Nuclear Chemistry56m
- BONUS: Lab Techniques and Procedures1h 38m
- BONUS: Mathematical Operations and Functions47m
- 12. Introduction to Organic Chemistry1h 34m
- 13. Alkenes, Alkynes, and Aromatic Compounds2h 12m
- 14. Compounds with Oxygen or Sulfur1h 6m
- 15. Aldehydes and Ketones1h 1m
- 16. Carboxylic Acids and Their Derivatives1h 11m
- 17. Amines38m
- 18. Amino Acids and Proteins1h 51m
- 19. Enzymes1h 37m
- 20. Carbohydrates1h 46m
- Intro to Carbohydrates4m
- Classification of Carbohydrates4m
- Fischer Projections4m
- Enantiomers vs Diastereomers8m
- D vs L Enantiomers8m
- Cyclic Hemiacetals8m
- Intro to Haworth Projections4m
- Cyclic Structures of Monosaccharides11m
- Mutarotation4m
- Reduction of Monosaccharides10m
- Oxidation of Monosaccharides7m
- Glycosidic Linkage14m
- Disaccharides7m
- Polysaccharides7m
- 21. The Generation of Biochemical Energy2h 8m
- 22. Carbohydrate Metabolism2h 22m
- 23. Lipids2h 26m
- Intro to Lipids6m
- Fatty Acids25m
- Physical Properties of Fatty Acids6m
- Waxes4m
- Triacylglycerols12m
- Triacylglycerol Reactions: Hydrogenation8m
- Triacylglycerol Reactions: Hydrolysis13m
- Triacylglycerol Reactions: Oxidation7m
- Glycerophospholipids15m
- Sphingomyelins13m
- Steroids15m
- Cell Membranes7m
- Membrane Transport10m
- 24. Lipid Metabolism1h 45m
- 25. Protein and Amino Acid Metabolism1h 37m
- 26. Nucleic Acids and Protein Synthesis2h 54m
- Intro to Nucleic Acids4m
- Nitrogenous Bases16m
- Nucleoside and Nucleotide Formation9m
- Naming Nucleosides and Nucleotides13m
- Phosphodiester Bond Formation7m
- Primary Structure of Nucleic Acids11m
- Base Pairing10m
- DNA Double Helix6m
- Intro to DNA Replication20m
- Steps of DNA Replication11m
- Types of RNA10m
- Overview of Protein Synthesis4m
- Transcription: mRNA Synthesis9m
- Processing of pre-mRNA5m
- The Genetic Code6m
- Introduction to Translation7m
- Translation: Protein Synthesis18m
Waxes: Study with Video Lessons, Practice Problems & Examples
Waxes are simple lipids formed by an ester bond between a long chain fatty acid and a long chain alcohol. This structure gives waxes their unique properties, including water repellency, making them essential for protective coatings on bird feathers and plant leaves. Understanding waxes as a specific classification of fatty acids enhances comprehension of lipid diversity and functionality in biological systems.
Waxes Concept 1
Video transcript
Waxes Example 1
Video transcript
For this example, it says, provide a structure of beeswax. It contains myricyl alcohol and palmitic acid. So step 1 says, draw the structure of the alcohol in its condensed form, as well as the fatty acid. We're going to place an OH from the alcohol next to the carboxyl group of the fatty acid. Now, let's just do that first. The alcohol is CH3, and we're going to say here that it has 29 of these CH2 groups. We're going to do 28 of them together. The 29th one, we're going to have it branch off, and then it's connected to the OH group.
Now we need to draw the fatty acid, which is palmitic acid. Palmitic acid represents a saturated fatty acid. And if we recall our memory tool 1, it is that Lori's Mystic Palace Stores Art. Here, the mnemonic PALIS stands for palmitic acid. This mnemonic starts at 12 carbons and goes up to 20. And we have carbons 14, 16, 18. So, palmitic acid is a fatty acid that's saturated and it has a total of 16 carbons. The first carbon is part of the carboxylic acid, so that's 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16. Okay. So that's 16. So we've done that part.
Now instead of OH on alcohol, we're just gonna draw an O; this is going to help later on when we connect these two together, and we're going to say, do not draw OH on fatty acid. So let's remove this OH. We have these two fragments.
Step 2 is we're going to form the Ester Bond. So we're going to draw a bond between the oxygen of the alcohol and the carbonyl carbon of the fatty acid. Connect these two together, this oxygen with this carbonyl carbon here, and we'll have our beeswax. So let's write this out.
We have CH3 connected to 20 of these CH2s, connected to 1 more CH2, then O, which is going to be connected to the carbonyl carbon. So remember it's 16 carbons, so 2, 4, 6, 8, 10, 12, 14, 16. So that's 16. So this would represent our beeswax. We've combined the alcohol with our saturated fatty acid in order to make this particular type of wax. They're connected together through an ester bond.
Do you want more practice?
Here’s what students ask on this topic:
What are waxes composed of in terms of their chemical structure?
Waxes are simple lipids composed of a long chain fatty acid and a long chain alcohol. These two components are connected by an ester bond. The ester bond is formed between the carbonyl group (C=O) of the fatty acid and the hydroxyl group (OH) of the alcohol. This unique structure gives waxes their characteristic properties, such as water repellency. Understanding this composition is crucial for comprehending the role of waxes in biological systems, such as their function in forming protective coatings on bird feathers and plant leaves.
What properties do waxes possess due to their chemical structure?
Due to their chemical structure, waxes possess water-repellent properties. This is primarily because the ester bond between the long chain fatty acid and the long chain alcohol creates a hydrophobic (water-repelling) molecule. These properties make waxes essential for forming protective coatings on bird feathers and plant leaves, helping to prevent water loss and providing a barrier against environmental elements. This functionality is crucial for the survival of many organisms in various ecosystems.
How do waxes differ from other types of lipids?
Waxes differ from other types of lipids primarily in their structure and function. While all lipids are hydrophobic, waxes are specifically composed of a long chain fatty acid and a long chain alcohol connected by an ester bond. This structure gives them unique properties, such as water repellency. In contrast, other lipids like triglycerides are composed of glycerol and three fatty acids, and phospholipids contain a phosphate group. These structural differences result in varied functions, with waxes being used for protective coatings, while other lipids play roles in energy storage and cell membrane structure.
What role do waxes play in biological systems?
In biological systems, waxes play a crucial role in providing protective coatings. For example, they form a waterproof layer on the feathers of birds, which helps in keeping them dry and buoyant. Similarly, waxes coat the leaves of plants, reducing water loss through evaporation and protecting against environmental stressors like pathogens and UV radiation. These protective functions are vital for the survival and efficiency of various organisms, highlighting the importance of waxes in nature.
What is the significance of the ester bond in waxes?
The ester bond in waxes is significant because it connects the long chain fatty acid to the long chain alcohol, forming the wax molecule. This bond is crucial for the hydrophobic properties of waxes, making them water-repellent. The ester bond is formed through a condensation reaction, where a molecule of water is released. This bond not only defines the structure of waxes but also contributes to their stability and functionality in biological systems, such as forming protective coatings on bird feathers and plant leaves.