We're going to say here that our isoelectric or isoionic points represent the pH where a polyprotic acid doesn't migrate to an electrical field because it's neutral. Traditionally, when we talk about isoelectronic and isoionic points, we refer to amino acids. Now, a lot of the amino acids have 2 pKa values because of their acidic carboxyl group and their amino group that can be protonated to act as an acid as well. At the isoelectric point, we have an amino acid that has a negatively charged carboxyl group and a positively charged ammonium group. Overall, the amino acid is neutral because the negative end and the positive end cancel each other out. At the isoelectric point, your amino acid exists as a zwitterion ion. We have our carboxyl group here, our ammonium ion group here. Here, this carbon that is next to the carboxyl group is referred to as our alpha carbon. We'll just write the alpha symbol actually. The alpha carbon has connected to it an alpha hydrogen. There are 20 different amino groups or amino acid groups because there are 20 different R groups when it comes to amino acids. If we dump this zwitterion ion in a solution that is more acidic, what's going to happen is we're going to protonate this carboxyl group. By protonating it, now it doesn't have that negative charge. It has this newly acquired H plus group and all that remains is this positive charge. Below our isoelectric point where the solution is more acidic, we exist as a cation. If we go the opposite way and throw the zwitterion into a more basic solution, what's going to happen is we're going to deprotonate or remove an H+ from this ammonium group here. As a result, it becomes NH2 which is neutral. Overall, the charge of our amino acid would be negative. In a more basic solution, which is above the isoelectric point of my amino acid, my amino acid would exist as an anion, a negative ion. As a cation or an anion, they would be affected by an electric field. The cation being positive would be attracted to the negative plate of an electric field and the anion, which is negative, would be attracted to the positive plate because, remember, opposite charges attract one another. As a zwitterion, we are at the isoelectric point for an amino acid. It's neutral overall and is not attracted or repelled by an electric field. Now that we've gotten the basic idea behind isoelectric and isoionic points, click on the next video to see the calculations that are involved with both of these points and how they relate to the zwitterion or intermediate forms of compounds.
- 1. Chemical Measurements1h 50m
- 2. Tools of the Trade1h 17m
- 3. Experimental Error1h 52m
- 4 & 5. Statistics, Quality Assurance and Calibration Methods1h 57m
- 6. Chemical Equilibrium3h 41m
- 7. Activity and the Systematic Treatment of Equilibrium1h 0m
- 8. Monoprotic Acid-Base Equilibria1h 53m
- 9. Polyprotic Acid-Base Equilibria2h 17m
- 10. Acid-Base Titrations2h 37m
- 11. EDTA Titrations1h 34m
- 12. Advanced Topics in Equilibrium1h 16m
- 13. Fundamentals of Electrochemistry2h 19m
- 14. Electrodes and Potentiometry41m
- 15. Redox Titrations1h 14m
- 16. Electroanalytical Techniques57m
- 17. Fundamentals of Spectrophotometry50m
Isoelectric and Isoionic pH - Online Tutor, Practice Problems & Exam Prep
![](/channels/images/AIStars.png)
The isoelectric point (pI) of amino acids is the pH at which they exist as zwitterions, having both positive and negative charges that cancel out, making them neutral. Below the pI, amino acids act as cations, while above it, they behave as anions. For diprotic acids, the pI can be calculated using the average of the two pKa values: . Understanding these concepts is crucial for grasping acid-base reactions and the behavior of polyprotic acids in solution.
Isoelectric and Isoionic Points
Isoelectric and Isoionic Points
Video transcript
![Content](https://cdn.clutchprep.com/guide_visuals/inline_images/e9AFagC4ipVQy5P4DUdItA.png)
Isoelectric and Isoionic Points
Video transcript
Here we say that at the isoionic point, the polyprotic acid exists as an intermediate. We can utilize past equations to determine the concentration of H+. Now remember, for a diprotic system or diprotic acid, we have 3 forms: we have the acidic form, we have the intermediate form, and we have the basic form. Here, we only have one intermediate form and the concentration of H+ for that intermediate form equals the square root of Ka1 times Ka2 times the formal concentration of my diprotic acid plus Ka1 times Kw which remember is 1.0 times 10-14 at 25 degrees Celsius divided by Ka1 plus the formal concentration again.
For a polyprotic acid, traditionally triprotic acids are the most common polyprotic acids discussed. We have the acidic form. We have the 1st intermediate form. We have the 2nd intermediate form, and then we have our basic form. Here we have 2 intermediate forms, which is why we have 2 different equations. So remember, here we'll be dealing with H+ for the 1st intermediate form, and here we'd be dealing with H+ for the 2nd intermediate form. Remember that pH here equals pKa1. pH here equals pKa2. Then here, pH equals pKa3. Depending on where your pH lands in terms of being in here or being in here can help us determine which equation really is useful in terms of determining pH or H+ in this case.
Now, the isoelectric point is the pH where the acid form is equal to the conjugate base form. Therefore, the average charge is equal to 0. Now again, if we're dealing with a diprotic acid, diprotic acids have 2 Ka values, Ka1 where we remove the 1st acidic hydrogen to give us our intermediate form and then Ka2 which gives us our basic form. Also remember here that Ka2 would be connected to Kb1 and then Ka1 would be connected to Kb2. Here, we really don't need to worry about the Kb values. Just realize for a diprotic acid, pH for the isoelectric point, which sometimes is written as Pi, equals half the pKa1 plus the pKa2.
With polyprotic acid, we run into the issue again of are we talking about the 1st intermediate form or the 2nd intermediate form. We have 2 different equations. Here, we have pH equals half pKa1 +1 pKa when we're dealing with the 1st intermediate form. And then here, we have pH equals half pKa2 +3 when dealing with the second intermediate form. Traditionally, when we talk about isoelectric points, we relate them to the amino acids.
Now for this first isoelectric point where we're dealing with the 2 lower pKa values, this is traditionally used for the acidic amino acids. The acidic amino acids have 3 pKa's. Here, we'd use the 2 lower pKa values that they have out of the 3. Examples of our acidic amino acids would be aspartic acid, which has a 3 letter code of ASP and the one letter code of D, and glutamic acid. Glutamic acid has a 3 letter code of GLU and the one letter code of E. If we're dealing with determining the isoelectric point of aspartic acid or glutamic acid, they both have 3 pKa values but we'd use the 2 lower pKa values to find the isoelectric point.
Now here, where we're dealing with the 2 larger pKa values, pKa2 and pKa3, this is traditionally used for the basic amino acids. Like the acidic amino acids, they also have 3 pKa's but we're focusing on the 2 larger pKa values to find the isoelectric points. Your basic amino acids would be arginine, which has a 3 letter abbreviation of ARG and one letter abbreviation of R. We also have histidine which has a 3 letter abbreviation of HIS and one letter abbreviation of H. And then lysine would be the last basic amino acid. Here, it'd be LYS and K. Remember, when we're talking about isoelectric points, we traditionally refer them to amino acids.
When we're talking about polyprotic acids, we're talking about amino acids with 3 pKa values. Diprotic acids, those are just the normal amino acids that are not acidic or basic. They only have 2 pKa values that we can use, so there's only one equation for them. And then also remember that when we're talking about the isoelectric point, we're really referring to the intermediate form of your diprotic acid or your polyprotic acid. When we're calling the equations for the intermediate forms for a diprotic system and a polyprotic system is essential on our path to determining what our pH will be. Keep in mind these different definitions and how they relate to these different formulas.
Isoelectric and Isoionic Points Calculations 1
Video transcript
So here we're told to calculate the isoelectric and isoionic pH of 0.025 molar glutamine. Here, glutamine has 2 pKas. pK1 equals 2.19 and pK2 equals 9.00. This is neither an acidic or basic amino acid. That's why a third pKa is not given.
Now, to determine our isoelectric point, we can say here that the pH is equal to half of (pK1 plus pK2). So, that's half of (2.19 + 9.00) which gives me a final pH of 5.60.
For the isoionic pH, anytime we have to find the isoionic pH, we assume that we're dealing with the zwitterion form of the amino acid, its intermediate form. It only has 2 pKa's, so it is a diprotic system. In this case, H+ would equal the square root of (Ka1 × Ka2 × 0.025 + Ka1 × 10-14) divided by (Ka1 + 0.025). We're gonna say here that Ka1 equals 10-2.19 and Ka2 equals 10-9.00.
Now that we have those values, we can plug them into the formula. It equals the square root of (10-2.19 × 10-9.00 × 0.025 + 10-2.19 × 1.0 × 10-14) divided by (10-2.19 + 0.025). Here, when we work out the problems on top and on the bottom, we're gonna get 1.61478 × 10-13 on top divided by 0.031457 on the bottom. When we take the square root of that ratio, we're gonna get as our final concentration for H+ as 2.265 or 2.66 × 10-6 molar.
So that represents the concentration of H+. Taking the negative log of it will give me my pH. Here, my pH equals approximately 5.64. Realize here that the values will be very close to one another because when it comes to determining the isoelectric and isoionic pH of a diprotic or polyprotic system.
The isoionic pH, because it involves the use of more values and the actual concentration, will be closer to the actual pH of my diprotic or polyprotic system. The isoelectric point, although close, usually is not as accurate. But don't worry, both of the values should be very close to one another anytime you do both of these processes.
Now that we've seen this, attempt to do example 2. Draw the structures and charge of aspartic acid at a pH of 9.82. So, aspartic acid represents an acidic amino acid. Therefore, it's gonna possess 3 pKa values. Based on those pKa values, determine which form would predominate at the given pH. Once you've done that, come back and see if your answer matches up with mine.
Isoelectric and Isoionic Points Calculations 1
Video transcript
So here it says, draw the structures in charge of aspartic acid at pH equal to 9.82. Aspartic acid represents an acidic amino acid. It possesses 3 pKa values. Its pKa one value equals write them up here. PKa1 equals 1.88. That is for its alpha carboxylic acid group. So that's the carboxyl group that's connected to the alpha carbon. PKa2 equals 9.60. And that is for the ammonium group connected to the alpha carbon. And then finally, pKa3 equals 3.65. That is for our R group. Here, we're going to say that the first way we can draw this structure is we have a carboxylic acid, which is my R group. Here is my ammonium group that's connected to my alpha carbon, and here's the other carboxylic acid group. Here, we're talking about pKa1 or pH equals pKa1. Once we pass this line here, it becomes basic enough for us to remove the most acidic hydrogen which is the hydrogen with the lowest pKa value. That means that we're losing this hydrogen here. Here, it would look like this now. Here, when we cross when we get to this line, pH equals pKa2. Once we pass this line, we're going to remove the next acidic hydrogen, most acidic hydrogen, which would be this hydrogen. Now, we'd have this form of my amino acid. And then finally, while we're dealing with pKa3, we have pH equals pKa3. And beyond this point, we're basic enough to remove the last acidic hydrogen which is one of these hydrogens here for the ammonium group. So now we have this neutral form, NH2. So here, the value would be 1.88. Here would be 3.65 and here is 9.60. The pH is 9.82. So we've gone beyond this line here. The predominant form of the amino acid would be this form where all the acidic hydrogens have been removed. Relating pH but it's piggybacking off of concepts we've seen before where we're relating pH to pKa. If the pH is greater than the pKa, we have enough of a basic enough environment to remove an acidic hydrogen. Now that we've seen this example, attempt to do practice question 1 where we're asked to figure out what our pI value is for the given amino acid. Once you've attempted this, come back and see if your answer matches up with mine.
Calculate the pI value for histidine. pKa1 (carboxyl group) = 1.60, pKa2 (ammonium group) = 9.28, pKa3 (R-group) = 5.97.
Calculate the pI value for gluatamic acid. pKa1 (carboxyl group) = 2.16, pKa2 (ammonium group) = 9.96, pKa3 (R-group) = 4.30.